BOOSTED FD BUILD.

[Grant Monkhouse]

That's sound like exhaust leak, probably turbo to engine gasket? It sort of disappears when you Rev it, most likely because gasses are travelling a lot faster

[boosted]

Great...not happy.

[Grant Monkhouse]

It's not an impossible job but it's not easy, studs can snap if your rushing

[boosted]

Japfest out then ......

[boosted]

It looks like a complete mare....i chickened out on the blue 1....hayward rotary done that 1 for me. Its only slight atmo....better to go single that mess about lol!

[boosted]

Up n in running no smoke just so hard to determine where its coming from.

[Grant Monkhouse]

Fairy liquid and water in a squirt bottle should help see if there's a leak

[boosted]

Only noticed the noise when sorted the tick over anything above 1000rpm you cant hear it....ive done nissan skyline, 200sx and impreza turbo swaps...so capable its just the though of it.

[boosted]

On a positive note it sounds like a brap . Anyways gonna get down off the ramps and go for a drive.

[Grant Monkhouse]

It's easier to install a single turbo system than to remove and replica the standard twins lmao

[boosted]

Yeah just read an online guide....complete ballache...id rather pull the engine. What i am goona do is give all the top bolts a nip like i done the bottom yesterday and see if i get lucky. Its only the start of a blow and could be the downpipe top bolts.

[boosted]

And ive got a can of magic spray. And fireballs from my arse. Lol

[boosted]

Looks like front turbo bolt loose...just need a 14mm deep 1/4 in to get to it.

[Grant Monkhouse]

There you go then. Probably because its northern running for ages a couple of heat cycles loosened the nuts. At least it's a cheap fix

[boosted]

Not sure yet cant get on it...lol. really is a pig.