Westory Progress.

Started by boosted, November 08, 2013, 06:49:41 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

boosted

Did you reset to default settings...
Pid is parameter id....it cant read
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

boosted

All parameters with current settings.....there is a dash command website. I had a very quick read.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

re japi

My Toyota Rav4...  Reset default settings? Hmm... I have to check that too...
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

Smiffers

In this context a PID is a identifier of a particular data element with the streamed data from the ODB device.

So using the device in the particular vehicle it is failing to identify if it can support any of the data types/addresses withing the data stream from the bluetooth device.

Some potential problems:

-The car does not have a protocol supported by the dongle or the software.
-Even though the protocol maybe supported the car does not provide any data supported by the receiving software
-If the bluetooth device is hosted as two serial devices within the OS (Incoming and Outgoing) you are connected to the wrong port and there for emulating a streaming device rather than the receiving device.
Westfield SEiW - 13B-MSP BW 7670 Turbo
www.facebook.com/rivetracinguk

re japi

Well, this car is 2001 model so it would explain that there is no PIDs for this car...

I have tryed basicallt everythin by now. Dont can get further, its stuck on receiving those PIDS...
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

re japi

Just a thought: Im using same obd port that MOT man uses. Is it only out port? So this system cannot send info thru it?
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

Only 1 obd port mate...did it work on freebie software on the rav4?
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

re japi

Ok... No, it didnt. And I tryed to get full version but something went wrong I think...

Dont understand... :(
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

Get a big hammer.....a smash it to pieces. Problem solved.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

re japi

Yes, leaning towards that :)
Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

boosted

Lol Christine 2.....frikin thing...just taxed on line....ran her up fine after pump swap  other day...went for prime of fuel pump ....nothing....sounds like pipe off....lets take the pump out again woo hoo.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Grant Monkhouse

Just to let you know, my rx8 is just fine

boosted

Quick fix....fuel hose softened in tank...slip off hosetail...at pot end...bit worried about other end but still going forca blast....mine running now....and its faster than yours    lol!
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Grant Monkhouse