Project rebuild....

[karl_tate]

yeh that side might be ok, the other is a little lower, i carnt even get up the drive, the diffuser get caught haha.

yeh didnt think about danny, cheers. so i might not have to take the hub off then :cool:

just seen this on ebay but not sure of any of the specs.

http://cgi.ebay.co.uk/Subaru-Wheel-Stud-Competition-Type-63mm-Long-Nissan-/280496473383?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item414ee48527#ht_500wt_698

[lee mills]

Looking good. What wheels are on it at the moment?

[karl_tate]

cheers lee, they are work emotion cr kai and for sale

[lee mills]

cheers lee, they are work emotion cr kai and for sale

 
what size/specs and how much?

[karl_tate]

i think they are 8.5 all around et 35 but will have to make sure. not sure how much, depends weather the 888\'s stay on. i dont need them.

[lee mills]

presumably there 18s and a price with tyres would be good. probably to rich for me but if you dont ask will never know:Giggle
 
Also what sizes are the tyres?

[karl_tate]

yeh 18\'s

well i was going to take the front tyres off and use them on the rear for the new wheels, probably looking for around £550 with two 888\'s.

they are 245/40

[lee mills]

Good price will pass though looking for something a bit wider on the rears

[karl_tate]

no worries, but you could just fit wider tyres on the other two and have the 245\'s on the front.

[lee mills]

no worries, but you could just fit wider tyres on the other two and have the 245\'s on the front.

Did think about or possibly using spacers will have a think.

[karl_tate]

well took the calipers and discs off and bashed the old studs out and thanks to clive i had 10 new one\'s

took some measurement\'s and cut them all down. then just simply pushed them in place and used some washers and a nut and pulled it through with a breaker bar using the mole grips with a jack to hold the hub from moving. who needs the gym hahaha








and all back on together.


still got a few things to do before saturday.

getting the tyres fitted tomorrow so i will then be able to raise the suspension, im going to put a jubilee clip around the adjuster on the suspension for now, think im just going to buy a new kit.
insure and tax it
removed and rebuild the clutch master cylinder and bleed the clutch and it will be something like ready.

need some sort of aerial tho, not too sure what to look for??

[lee mills]

Ive got a honda s2000 aerial mount on mine with a 60mm stubby aerial

[karl_tate]

ive got rid of the hole now tho lee and want it keep it clean looking, should of explained better lol

[lee mills]

Just get one to go inside the rear window.

[karl_tate]

fil did a sweet pic that he took at the PTM show the other weekend, thanks again bud