LSD on an EGI? 4 wheel steer?

Started by MiniMike16V, September 22, 2009, 10:51:30 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

MiniMike16V

I\'ve been digging through the forums and various sites online about EGI specs, but haven\'t been able to find much as it\'s mostly turbos that come up. Either it\'s because there isn\'t that much interest or i\'m not looking hard enough :Hammer
 
Just wanted to know more detailed specs on the EGI, like were they fitted with LSDs, 4 wheel steering? etc. Just a couple of rumours i\'ve come across.
 
Any help would be grand :D
 
Many thanks
 
Mike

dthebuk

they wern;t fitted with lsd\'s. Though you can fit an mx5 lsd into the egi diff casing.

And yes they also had rear steer.

You looking to eliminate the rear steer?


\'91 FC TII - Drifter... Under construction :D
:burnout

j3d1

Quote from: dthebuk;643452You looking to eliminate the rear steer?

 
yes, whats involved?

grinder

lots and lots of swearing usually !

have a search for DTSS and you will find a thread started by me that tells you how to do it


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

grinder



1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

m1tch

I think someone was selling some dtss elimiator bushes aaaages ago lol

Prof

I have some - are they the same for EGI and T2 - if so I have some - could be persuaded to sell them on ;)
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


j3d1

reheheeaallly... :)
 
How much would you want for them?
 
Thanks

Prof

I\'ll have a think - they are still in the packet with instructions :)
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


j3d1


grinder

ha ha ha ha another cheapskate in the making ;)


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

j3d1

Quote from: grinder;643515ha ha ha ha another cheapskate in the making ;)

Thanks man, thought I might "fit in" here :D

grinder

if you are as cheap as me - then you will fit in no probs - just dont complain about the flak that you will recieve

look at my sig - most of that was carried out by Brett :( !! LOL


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

j3d1

Gotta say the car cover for under £1 was quite an amusing read :D.
 
I place a big emphasis on worth (perspective) when buying / doing things for my car ;). Remember, its not a bodge, its a cost effective solution!

grinder

the £1 car cover - best thing ever - still on my 2nd one - so its cost me a whopping £2 ish soo far :D :D

i dont mind buying stuff for the car if i need it ( discs pads etc.. ) - but for random stuff i dont need - i try and be cheap !


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle