my rebuild thread

Started by leeincivic, April 05, 2009, 12:43:19 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Print
Go Down Pages 1 ... 3 4 5 ... 10
User actions

leeincivic

#45
August 05, 2009, 08:27:38 AM
it sits in the driverside next to the firewall, under the brake master cyclinder, dunno what its for tho, anyone?
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

leeincivic

#46
August 11, 2009, 09:42:37 PM
right engine bay is finished ready for engine!! bored now tho haha,

fitted a dragon gearbox brace so av managed to get rid of the bit of wood holding it up haha i did notice while i was under the car the adjustable arms are totally different on each side???? could this of been a cause of my car tramlining over bumps, white lines etc? clearly needs setting up tho,

anybody used these guys heard they are ace? http://www.wheels-inmotion.co.uk/

made up some new brake and clutch lines at the weekend which am made up with :)




made up little brackets to hold the boost controller solenoid and also tuck in the alarm siren, notice the need for new bolts lol





also got hold of a strut brace that i gave a bit of a spruce up and polish also new bolts :D




also got some 6000k hids courtesy of bren at apex performance, top bloke:chat


also karl its lookin good!!! thats all i have to say you know what i mean :D haha
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

Kash_

#47
August 12, 2009, 12:14:24 PM
Looking good dude :)

AshRX

#48
August 12, 2009, 12:23:57 PM
Car looks stunning dude.

Screamer pipe being posted today :)

jowell16

#49
August 12, 2009, 12:43:33 PM
Hey lee car looks really nice, just missing an engine, haha. I believe your gonna give us a hand removing my abs,  in a few weeks? And if you think of upgrading your brakes to bigger ones, i\'ll be intrested in purchasing yours.

karl_tate

#50
August 12, 2009, 06:38:46 PM
looking good lee. keep at it :D and yeh i know what you mean, nice one.

yeh bren is a top bloke, how much did you pay for the lights??
____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

MaLicE

#51
August 12, 2009, 07:27:24 PM
hnmmm im sure there are plenty of people who would argue about brens niceness...

coming from having a 200sx and falling four buying his cheap quality products then having them ALL fail...

anyway back on topic, your car looks stunning and really makes me want to strip mine and do the same but i need a garage first lol! and a second car...

leeincivic

#52
August 12, 2009, 09:38:01 PM
Quote from: AshRX;633990Car looks stunning dude.

Screamer pipe being posted today :)

spot on cheers dude

Quote from: jowell16;633996Hey lee car looks really nice, just missing an engine, haha. I believe your gonna give us a hand removing my abs,  in a few weeks? And if you think of upgrading your brakes to bigger ones, i\'ll be intrested in purchasing yours.

yeah not a problem mate, just dont offer any warranty against my work haha, kav did mention about the brakes, might just look for 356mm disks and brackets for the min but will keep my options open, cheers dude

Quote from: karl_tate;634064looking good lee. keep at it :D and yeh i know what you mean, nice one.

yeh bren is a top bloke, how much did you pay for the lights??

malice i always thought bren was the 200 man to go to for all the parts???

and karl i paid £60 for the hids, mine were the h3 type to fit in the lights av got but dunno if the price varies with type?? made up with them tho :Thumbsup!
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

MaLicE

#53
August 12, 2009, 09:59:37 PM
he is one of the biggest sellers for 200sx stuff, however problem is he buys all of his "apex performance" stuff from cheap factories in china, which at the end of the day isnt a huge problem however he then slags off other companies that sell exactly the same product for less money and says "well they are cheap chinese coppies" when i had my 200 i got fooled and purchased stuff off of him, and quickly learnt how stupid i was, exhaust system (turbo back) coilovers, god knows what else, which i then had to replace over and over, because they were so bad!

which is why with my rx7 im saving before i buy stuff, i learnt buy cheap buy twice... unless your getting a bargain on stuff like i just did with a power fc lol! and i can understand things like buying xs power intercoolers to make your own vmounts out of... and i will go that route i just dont like brens attitude and the way he works...

leeincivic

#54
August 12, 2009, 10:06:02 PM
fair enough i will take your word for it, never dealt with him before but know he is big in the 200 world so thought he was the person to go to, when i went up there to get the lights his stock is massive so yeah he prob does buy it all from china otherwise the unit would be full of millions of pounds worth of gear,

my only quarm with him is that i asked if he could get an exedy clutch and flywheel cheaper than the £1100 i have seen them for and he said he would email me a price, the email he sent me said that he could not and offered me carbonetics one at £1500 plus vat, i did ask for a CHEAPER price than the exedy haha

still happy with the lights he gave me but will take your words on board :Thumbsup!
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

slingo

#55
August 12, 2009, 10:33:50 PM
Quote from: MaLicE;634101he is one of the biggest sellers for 200sx stuff, however problem is he buys all of his "apex performance" stuff from cheap factories in china, which at the end of the day isnt a huge problem however he then slags off other companies that sell exactly the same product for less money and says "well they are cheap chinese coppies" when i had my 200 i got fooled and purchased stuff off of him, and quickly learnt how stupid i was, exhaust system (turbo back) coilovers, god knows what else, which i then had to replace over and over, because they were so bad!
 
which is why with my rx7 im saving before i buy stuff, i learnt buy cheap buy twice... unless your getting a bargain on stuff like i just did with a power fc lol! and i can understand things like buying xs power intercoolers to make your own vmounts out of... and i will go that route i just dont like brens attitude and the way he works...

second all of that ! i think alot of peeps have screwed the same way.
ksport = ....
apex = ....

leeincivic

#56
August 15, 2009, 05:50:11 PM
lights back and fitted :)





need engine back in to get it lower haha



THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

AshRX

#57
August 15, 2009, 05:51:09 PM
looking sweet Lee, now just fit that screamer pipe :)

leeincivic

#58
August 15, 2009, 05:53:21 PM
would love to but it dont float in mid air hahaha, believe you me i want it on now!! haha
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

leeincivic

#59
August 16, 2009, 08:25:11 PM
cheers ash you DA MAN!!!! haha



started painting all the engine bits yesterday with me mate kav, happy with the outcome, will see how durable it is tho haha







also started painting the plates today, 3 hours of masking! what a f\'in joke! ha, on the tin it said red............ honest!!! haha, happy that its come out a mad day glow colour tbh:chat





what ya\'ll think?
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh
Print
Go Up Pages 1 ... 3 4 5 ... 10
User actions