my rebuild thread

Started by leeincivic, April 05, 2009, 12:43:19 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

karl_tate

coming along nicely dude, where does the screamer pipe exit?? seems very long although i havent seen other people\'s setup.

and the painted bits look cool as :yes masking is a joke.
____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

leeincivic

screamer exits just behind the front drivers wheel matey, mine at the minute was only around 5 inches long and pointed straight towards the ground, hopefully there will be enough room to get it exiting out of a hole in the skirts :p

yeah i wanted a stand out colour but could not find one so i got the red, score!! haha, just waiting for a vht clear lacquer to turn up to get it nice and smooth and fingers crosser easier to clean if i need to, :3Confused
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

DR SCHNITZEL

Sweet lights dude. Super safe.

leeincivic

cheers la, did ya look for a ciggy lighter? hows yours running now?

the plates that were lumo orange have now gone red after using some vht clear to protect it a bit, gutted:(

got a replacement front housing from rx motors today, top blokes and quick delivery,:Thumbs-up

got the 2 painted up in silver now so av done all i can do pre-rebuild :D

bored now!! haha


whats a post without pics:Laugh


THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

leeincivic

this pic means only 1 thing!!!



its on its way to getting finished!!! woop woop haha

engine is away at the minute getting ported by lets just say a well respected engine builder :) and just got this little collection of bits from lindop (top place and very helpfull), be going back tomoz to get some fuel bits like swirl pot and 044 pump and that

anyone got ideas on a clutch??
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

MARKPRIOR

awsome!

wish i had the skill and the patients

leeincivic

no skills involved i pay people for that! haha:Giggle
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

slingo

Rock on lee ! not long now dude ,say hello to jaydee for me ha ha

leeincivic

no not long at all mate, nice try but not a jaydee special, its an era mega special!!! haha:p
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

karl_tate

____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

leeincivic

can\'t wait for that sweet sweet noise :) hows yours runnin karl?
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

karl_tate

i bet mate, its going to make some great power as well :cool

yeh running good, just need to get my fuel pump changed then im back off to see pip to finished the map hopefully without any problems.
____________________

Built In Japan - Built Better In The UK

XBOX GAMERS TAG --- tatey1985

leeincivic

right got bored today so did some work on the boot ready for the swirl pot and pump, bare in mind i need to sort the wiring out to the pumps and also fix the pump and pot down, does the position look ok for ya\'ll?

also gonna get a new tyre and paint the space saver white (for a change haha), was gonna get shut of it but better safe than sorry eh :D

before pics





after some carpet



THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

marcusd666

looking forward to see it on the road again Lee will have to have a meet when she is up and running
marcus

'92' RX-7 FD3s type-R Black
'04' RX-8 231 Winning Blue (sadly missed)
'10' AUDI A5 S Line Convertible (Daily Drive)

leeincivic

yeah definately mate, would be good to meet up fo sho!! will let ya know and maybe we could do a mini convoy to a big meet somewhere,

right due to boredom i went mad with the white paint!! ha

take one ghey yellow donut



and hey presto bit a rub down, some primer, ford white and loada laquer and looks like new :p



feature wheel :Thumbs-up



now to figure out where to mount the swirl pot and pump, ideas???
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh