Help removing my 13B engine

[Grizzly]

When the car is hot and you rev it to say 5-6k then let off quick (out of gear) does the revs drop to 250-300 or even stall?

If so I\'d be looking at setting the TPS up, if this is not the case then something more simple would be adjust the cold running plunger on the side of the Throttle. My car starts and revs to 1000-1100 then after 20 seconds 9somthing like that) drops to 850.

GRINDER! When I bought my Vert it had a blown water seal when I pulled it I found the water seal locating channel had collapsed, so I\'m rebuilding it.

Chris

[grinder]

blimey - it all sounds very good ! ( and very complex )

[Jus]

Another Rotary is Born...

:wave :wave :wave

Great fun, enjoyed getting oily hands

Jus

[grinder]

blimey - not heard from you in a while JUS - what you been up to recently ?

[Jus]

Originally posted by grinder
blimey - not heard from you in a while JUS - what you been up to recently ?

Been working hard, things are getting nearer to normal, what\'s normal I ask myself.

Anyway, good to hear the local rotary gathering still remains. I am looking at putting together a rebuild package, tailored for the home enthusiast.

See how things develop over the next few weeks but wouldn\'t it be great to have a rebuild kit which comes with step by step guide, all included in the cost.

You\'ll still have to put in the hard hours, get really dirty and be prepared right off mistakes in order to gain experience (not saying that anyone will make mistakes).

I\'ll have some more information at the next meet, let me know if your interested.


Regards...

Jus

[Sean]

Wow! Everyones here!!

I\'ve not logged on for a while (been busy getting MOT and tax), yes thats right! It\'s running as sweet as a nut!!!!:cool

It\'s taxed, MOTed, insured and I\'ve been playing in it all day!!:rollin

Thanks everyone for all your help (especially you, Grinder):wave

I\'ll be seeing you all at the Mascrat Manor on the 8th I hope.

[grinder]

SUPERB SEAN !!

thats is excellent news , im really happy for you !!!

so you are gonna make the 8th then ?? YIPPPEEEEEEEE !!!!

glad its all running now , and i bet you are tooo - and i bet clare is over the moon aswell

[Sean]

She still calls it a pile of junk (I\'ll convert her one day)

Only one snag though. I know it was a hot day today, but it idled a lot more lumpy today than it did yesterday. Should I be worried?

[grinder]

oh dear god - i wouldnt start thinking like that :eek

have you checked oil levels and water levels and the such like

is the oil cap on tight ( mine ran fine but wouldnt idea when i forgot to put it back on - i suppose it was loosing pressure ! )

just check , check and recheck all pipes and fitting - you never know something might have come loose ??

if you go on the 8th - are you going in any weather

JUS - so whose engine you been playing with then ?

[Sean]

I\'ll be there don\'t you worry, even if I have to tow the bloody car!

Oh! Oil pressure is fine, and the turbo is a lot more vocal than I remember!:confused:

[Grizzly]

Jus was helping me with my rebuild, There is quite alot of stuff that is easyer with a happy helper.

Chris

[Jus]

Originally posted by Grizzly
Jus was helping me with my rebuild, There is quite alot of stuff that is easyer with a happy helper.

Chris

Yeh! Some say it calms the angry worker :p

I\'ll be round @ 10:30, need to catch MacDonalds Breakfast first with nightmare coffee cup included. For some reason I get the blasted coffee everywhere

Right catch u m8\'s l8r...

Jus

[Grizzly]

I have only been running my car in for a day (all of 31 miles) and i dont know how people drive under 3500rpm every day! its driving me mad.

I just want to see how it picks up??



Chris

[Jus]

Really enjoyed the experience, lots of cleaning, (didn\'t do much my helper did that) messuring up the right bits (didn\'t do much of that either, my helper did that too) and finally the rebuild. Guess who the helper is :wave :wave

Oh YES! Nice big exhaust porting with really big seconday ports with a slight modification to the primarys, giving overlap and the Brap Brap Brap on idle.

It is like making a big cake, a nice base, then your sponge followed by your filling, then another sponge followed by another filling.

I can\'t wait to do the next, love it...

Jus

[Jus]

I think I should let Chris fill in the rest. Opps... I hope this engine wasn\'t top secret.

At least I haven\'t told them about the turbo your fitting after you\'ve ran her in, shhhh, lol.

Btw, the whole job was completed within one week, including porting.

WELL DONE Grizzly...

:bandit :bandit :bandit :bandit :bandit :cool :cool :cool :cool :cool