Confused About Precat

[RobbieRX-7]

I HAVE A 92 JAP IMPORT TYPE R AND HAVE READ THAT IMPORTS DONT HAVE PRECATS..MINE DOES (IM PRETTY SURE).  IT HAS A SORT OF HEATSHEILD JUST LIKE A NORMAL CATALITIC CONVERTER WOULD. ITS NOT ROUND LIKE A NORMAL EXHAUST BUT SQUARISH WITH SEAM WELDS ON BOTH SIDES AND THE WHOLE THING BENDS UNDER THE FOOTWELL.  BEHIND THE STEREO GETS BLOODY HOT WHICH CAUSES THE MP3 PLAYER TO SKIP ALL OVER THE SHOP SO THIS IS WHY I PRESUME I HAVE THE PRECAT. ALSO  IVE RECENTLY BOUGHT AN HKS DOWNPIPE AND I KNOW ABOUT THE ECU RUNNING LEAN BUT CAN I RE-MAP MY ORIGINAL ECU OR WILL IT NEED AN AFTERMARKET UPRATED ECU.
THE CAR IS TOTAL STOCK
THANKS CHAPS

[scooby_si]

erm i\'ll stick to what i know & that is standard ECU can;t be remapped at least here so new ECU is only plan apexi power FC probably the most popular cunning choice for not stupidly OTT mods......http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/10/10_1_2.gif\' border=0> lol
Dunno bout the other bits....
Si
PS Cov meet on Sun?

[scooby_si]

if downpipe is only thing yer doing not sure if you might get away with that mind but normally cunning to do ECU sooner rather than later mod wise......
Si (wise beyond his ignorance http://www.smileycentral.com/?partner=ZSzeb008\' target=\'_blank\'>http://smileys.smileycentral.com/cat/355v.gif\' border=0>lol)

[RobbieRX-7]

IS THAT A MEET IN COVENTRY?? LOVE TO GO BUT I HAVE A HUGE DENT IN MY DRIVERS DOOR (BIT ASHAMED REALLY) GOT A NEW DOOR THOUHG..JUST GOTTA GET IT MATCHED IN RED

[ro284]

Hi mate,
            i am no expert, but Chris who is rebuilding my engine for me is, and from what i gather from him yours is the same as mine, a jap import, if it was a UK model it would have a pre cat like a rugby ball in the downpipe! mine hasnt and the air pump only connects to the centre cat! and i will leave mine standard, for fear of running my new engine lean, i\'d rather not risk it,
Hope this is correct, as i said thats how i understand it!
cheers Bob

[RobbieRX-7]

JUST OUT OF CURIOSITY..how do you know that the air pump only connects to the second cat? ..is there a pipe running from the air pump to there? , when i done the vacuum hose replacement job i noticed that a hose runs from the airbox to the air pump then from the airpump to the inlet area (not to the cat)

[scooby_si]

Robbie dont be shy, details in meets section, there will be a few scooby owners & they aint embarrased by what they drive
Si (/hijack mode off)

[clive]

Originally posted by RobbieRX-7
JUST OUT OF CURIOSITY..how do you know that the air pump only connects to the second cat? ..is there a pipe running from the air pump to there? , when i done the vacuum hose replacement job i noticed that a hose runs from the airbox to the air pump then from the airpump to the inlet area (not to the cat)

Hi Robbie,

The pre cat thing sounds real weird and as described above they look like a rugby ball, whatever l advise removeing it as you are because  they cause a huge amount of heat, but when you remove yours  l would like to know what it is you have fitted as it sounds real strange.

There will be a 10mm steel pipe running out of the air pump leading down the side of the gearbox into the main cat under the car.    

hope this helps

[Smifta]

Robbie,

If you would like to run your decat (HKS), and maybe do a few other mods without going for a full programmable ECU. I have a stock ECU that has been rechipped for a richer mixture. I have dyno plot of a/f ratios / boost / bhp / torque to prove it! I was running intake/frontmount/full exhaust and still running slightly rich. I would probably recommend getting a Power FC anyway, but if you can\'t stretch that far now, PM me

Alex.

[MillSpeed]

My J-Spec car has the same thing by the sounds of it, but all that metal shit around it is just a heat sheild. Have you ever seen a picture of a pre-cat? They\'re fricking huge. Recon you shld be ok with the HKS downpipe, not sure how much of an advantage they offer with the rest of the stock exhaust in place. Might be worth heat-wrapping it to try and reduce under-bonnet temps a tad.

[RobbieRX-7]

just thought id post a pic of this thing under my RX..The big question   IS IT A PRECAT OR NOT?? hopefully it is so i can release a few more horses and get rid of the fatal enemy..HEAT!!

[RobbieRX-7]

..

[ro284]

Hi mate,
              i took my engine out last week, and mine looks the same as that, it is a lot of heat shields round downpipe, there is no cat in mine, and no connection from the air pump, which only goes to the main cat, big flat one further back, they are the jap spec cars, which i gather do not have a pre-cat. i will leave the downpipe as it is on mine, standard! engine being rebuilt by Chris at the moment.
Bob

[gaz 7470]

hi robbie
              mine is a 92 type r import your welcome to come and compare yrs with mine if that would be any help

[Iwan]

Originally posted by RobbieRX-7
..

that is not a cat ! You have NO precat installed. I will make some pics of aprecat and post in here later.

REgards
Iwan