Would these fit on the FD?

[Steve Burnett]

18x9 PCD 114.3 +25
18x10 PCD114.3 +25

I know 18" is fine, I know 114.3 is fine but is the with and offset okay?

[J4P RX]

You might have some rubbing.  They will come out pretty far.  Have a look back at Bens (Initial D\'s) recent photos as his are similar size, and he does have some rubbing.

Cheers
Lee

[maximtaylor]

Agree, you need more offset! Something like 40 or 50 should be your goal, nearer 50 with a 10 inch rear rim.

Max

[Steve Burnett]

but with the addition of some spacers (10-15mm) this would take the offset to an acceptable non rubbing space. Is that right?

[shaunwil]

If its moving it out with spacers then you may need to make some custom spacers so the ride quality is still there. I had 5mm on my fto after i fit my brake kit and it was wobbling over 70mph ! stuck 3mm on and it was fine. 10 or 15mm is alot of specer !

Shaun

[J4P RX]

Spacer makes the wheels come out further.

EG a +20 offset with a 15mm spacer will be a +5mm offset.

In this case, the wheels are already sticking out too far so adding a spacer would make it worse.

Lee

[Steve Burnett]

I thought that would be the case. + to me means - if you know what I mean. Probably not.

Shame as the whels were very very nice.

[Initial-D]

I got 9J 18 +18 fronts and 10J 18 +22 rear and they stick out a bit, ideally I\'d need the arches flarred or a wide body to accomodate them for harsh handling on a track.

Although my suspension is very solid now and I have just over half an inch clearance between the tire and the arches - which is fine for fast road cornering. (Just mustn\'t hit any bumps whilst cornering)! lol!!:p