I Want to achieve 450bhp advice please...

[Aliakeel]

Hi I\'m gonna be straight to the point,my car is an fd 93 current mods are ,single turbo 366s,850cc injectors all round,high capacity sard fuel pump, 3.5 inch exhaust ,hks 3.2 ecu,pwr intercooler with rad,twin power ignitions,pushing 400bhp at 0.9 bar,and I bought new full system from full function engineering in America new rails and 2000id and 1000id dynamics injectors so all I need to know is possible to achieve the 450bhp with changing the fuel system on my current mods?or I need to change or upgrade something else?

Thanks.

[Ada7]

What was your injector duty like at 0.9 bar? If you had plenty in reserve you could try uping the boost and see if you can get a few more horse out of what you already have

Adam

[Grant Monkhouse]

What turbo are you running? If on a single turbo just get some more boost in there with a remap. You should be able to get 1.4 bar without having to add/change anything

[Aliakeel]

I already bought the fuel system now and my turbo is Borg warner 366s ,my injectors 850 cc all round so I thought put bigger once migh gain extra 50bhp I wanted ,and my engine is street port is that ok to rise the boost more?

[BlitzBoy]

if you going to 1.4 bar you need to change the map sensor (stock map sensor good for 1.15-1.2 bar), defo fit the bigger injectors you bought anyway. Just a word of warning normal high octane fuel (99) gets a bit iffy with pre-det with rotaries on high boost past 1.1 BAR, you could wind back the ignition timing a few degrees on the map will help, I would add WI myself.

But at 1.2 BAR you should hit 450bhp on your setup or close to it

[BlitzBoy]

You need to go to HKS a tuner to change the settings for injectors and remap on your HKS ECU, Jaydee should be able to do it for you

[Aliakeel]

You need to go to HKS a tuner to change the settings for injectors and remap on your HKS ECU, Jaydee should be able to do it for you

Who\'s jaydee ?any contact number for him please?or where I can find him?
Cheers

[Aliakeel]

Also I found garuge  near Birmingham called pro tuner can remap hks but I\'m not sure if they any good for rx7 .

[Mir]

Contact number for Jaydee is 07878376673

You won\'t be disappointed with his mapping

Mir

[skybusr34]

Also I found garuge  near Birmingham called pro tuner can remap hks but I\'m not sure if they any good for rx7 .

Mapping rotarys is a completely different game to mapping boingers. My advise is use someone like jaydee.

I have no connection with any mappers on or off the forum so unbiased.

[BlitzBoy]

Defo go Jaydee dude, he has mapped quite a few Rotaries on HKS Ecus, a normal tuner will treat an rx7 like a piston engine and push the timing and probably blow it

[JayDee]

Unfortunately I am not a hks tuner, reworx,  pro tuner or mtg who I think are in the Midlands will be able to help you.

Defo go Jaydee dude, he has mapped quite a few Rotaries on HKS Ecus, a normal tuner will treat an rx7 like a piston engine and push the timing and probably blow it

[Bone]

Yep go to Pro Tuner. Greg Gush will sort you out. A great tuner can tune anything.

[Aliakeel]

Ok thanks guys ,what WI is good to buy in Market ATM any idea? something reliable .

[Grant Monkhouse]

Aquamist do good stuff