RX7 S3 SA22C JDM 12A turbo breaking

Started by drtool, September 15, 2011, 03:27:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

drtool

Complete RX7 series 3 being broken
 
The car is a factory 12A turbo model from Japan with SA22C VIN code.
 
On eBay
 
Item #: 250892948287

12at

is the motor a runner?
 
if so how much


drtool

Hi guys,
 
I really wanted to use this engine and box in a project car, but space is getting tight so this is now for sale.
 
12A turbo engine (165hp) complete with low compression rotors (8.5:1), larger volume oil pump, Hitachi turbo, fuel injection, turbo oil drain in front cover, boost retarding distributor, direct oil injection through the housings (similar to FC design).
Comes with all sensors, coils, leads, complete loom and computers, air box and all piping.
No radiator or oil cooler but these are the same as S3 radiator and S2 front mount oil cooler.
Can throw in a S3 rear counterweight if needed.
 
12A turbo gearbox (significantly stronger box)
Turbo ratios are: 1st: 3.622, 2nd: 2.186, 3rd: 1.419, 4th: 1.000, 5th: 0.791
UK FB ratios are: 1st: 3.674, 2nd: 2.217, 3rd: 1.432, 4th: 1.000, 5th: 0.825
 
Asking £750 the lot.
 
Here\'s the pics:
Turbo - HT18S-BM
No oil showing in the inlet or outlet, top hat, manifold etc. No apparent damage and no play in the bearings.
 

 

 

 

 

 

 

 
The turbo manifold - N253
No cracks and the gaskets are all intact and in good condition.
 

 

 

 
The block
Has comp on all 6 faces. All apex seals are intact. Engine is complete and unopened. Can be front or side mounted from centre iron (as in HB Cosmo). Comes complete from fan to clutch.
I oiled it when i got it so pics may look oily.
 

 

 

 

 
Comes with everything you see here:
 

 

 
The gearbox
It\'s a S3 gearbox with a S4 style bellhousing (extra vents) and better gear ratios and stronger. This will bolt to any 12A.
I\'ve subbed in a pic of a S3 gearbox for your viewing pleasure (on the right)
 

JayoM

Hey, first post :-p I\'ll post up an Intro thread tomorrow, but in the meantime...

Still for sale? Not in the position to buy it this month, but might be a nice Xmas present for myself...

Brett

Brap Brap Brap Brap

drtool

This was stripped and sold a while back. Check the dates.

JayoM

Fair enough, sometimes engines take awhile to sell. Cheers anyway!

Brett

Brap Brap Brap Brap