Alternative Inlet Manifold vacuum source?

Started by yiug412, June 19, 2010, 01:28:24 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

yiug412

Hi guys

Are there other alternative inlet manifold vacuum source other than the one going to the boost sensor?

My car has is the FC TII the air con and air pump removed.

Need one to run the Map sensor and the one more to run the BOV if possible.

Cheers :)

Louis
1984 Honda Civic EF single carb 1.4
1989 Nissan Cefiro A31 RB20DE
1990 Toyota MR2 Turbo SW20 3SGTE
1990 Mazda RX7 TII FC3S 13BT
2004 Mazda RX8 231 SE3P RENESIS!
1974 Leyland Mini Mk3 1000
1994 Mazda MX5 1.8i BP
2003 Mazda RX8 231... something with turbo.
Always put a smile on you when the \'beep\' goes on :chat

Prof

You say air pump is removed, has the air control valve been removed as well - it\'s on the side of the lower inlet manifold - behind where the air pump was and above the turbo ?
 
There are 2 vac ports on the front of the throttle body - if one of those is free it could be used.
 
Having said all that, there is nothing wrong with  T\'ing off the line that goes to the MAP sensor.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex