Turbo rotary Fiat 600 project

[600gaz]

Ok will do . Cheers .

[BlitzBoy]

Nice link Grant , that\'s more like it !!! Wicked stuff on that site . I like this one and it would make my install easier as well . :Giggle

http://youtu.be/iWTowyxe1do

Full of coolness in my eyes :3gears-lh

Rob is not running Projay btw he is running Rxparts manifolds

[Brett]

Hi Brett , they do soooooooooo many kits and packages that is best too ring them on 01322 286 850 with your car model , car weight and wheel size incase you can get something better/more suitable .
Prices are really good and lower than the local motor factors and they sell everything you need in various kits .
I got a discount but retail prices are £46 each for the 275x26 discs and £176 each for the calipers . They do cheaper 4 pot calipers for £122 and bigger more expensive ones as well in millions of sizes and combos .
One stop shop really and cheaper than Mazda , Ford , Renault , etc .

Brilliant!

Thanks for the info :god

[Grant Monkhouse]

Full of coolness in my eyes :3gears-lh

Rob is not running Projay btw he is running Rxparts manifolds

Ok, they\'re very similar though

[colum]

They actually aren\'t......

Keep up the good work gaz!

C

[Grant Monkhouse]

They actually aren\'t......

Keep up the good work gaz!

C

They look like it, in fact the one on rxparts is semi pp, so is rob now semi pp not
Big bridge? Oh this secrecy bores me.....

[BlitzBoy]

Rob has an original rxparts manifold, just a big bridgy (non semi PP), the runners, butterflies body and top hat are different between rxparts and Projay designs

[600gaz]

Just checked out the rxparts inlet set up and it looks almost the same as the projay one . Not sure what\'s best but both are neater and cooler looking than the stock set up and as my engine is on show all the time i need too buy one , lol . Anyone selling one ?

[Grant Monkhouse]

Yes E&J autoworks on FB. I\'m sure you could get it cheaper if you run a sticker of theirs in your car window:) I think they\'re as good as each other. I think they sell them on summit racing too

[colum]

Oh this secrecy bores me.....

what secrecy?

nothing at all about robs car or anything rob and myself do is secret, just tested proven stuff, you guys just assume too fast rather than pay attention to actually whats infront of you :rolleyes:

gaz, what you have to watch with all the 4barrel intakes is most are missing the centre plate bolt, the beauty of the rxparts intake is it comes in either semi pp or non semi pp, the runners are good (better and less restrictive) and more imprtantly the tb is the only one on the market with sequential butterflies that allow for smoother street driving roan is a good friend of ours and has helped us out with various things over the years

to be honest, with reg\'s car the stock intakes and 90mm tb became restrictive at over 700hp, but made alot more tourque

c

[Grant Monkhouse]

what secrecy?

nothing at all about robs car or anything rob and myself do is secret, just tested proven stuff, you guys just assume too fast rather than pay attention to actually whats infront of you :rolleyes:

gaz, what you have to watch with all the 4barrel intakes is most are missing the centre plate bolt, the beauty of the rxparts intake is it comes in either semi pp or non semi pp, the runners are good (better and less restrictive) and more imprtantly the tb is the only one on the market with sequential butterflies that allow for smoother street driving roan is a good friend of ours and has helped us out with various things over the years

to be honest, with reg\'s car the stock intakes and 90mm tb became restrictive at over 700hp, but made alot more tourque

c

Must apologies because I looked at the semi pp fanimold and thought that\'s what rob had after being told it was a big bridge. My bad.

I haven\'t really had a look at robs car up close, hopefully I will this year and have a chat with you guys.

I don\'t think gaz will mind about all 4 throttles opening at once, why BECAUSE RACE CAR

[600gaz]

Ok cheers Chaps . Mine will mostly be a street car that does some racing now and then really . Was going for the typhoon type jobbie with a single 90mm throttle rather than 4 barrel type if i\'m honest . No rush though as the car won\'t need this for a while and i need pay for the chassis first , lol .

[colum]

The typhoon is a very nice piece, running it on one of our cars this year

[600gaz]

What car have you got it on ? I\'ve been to a few jap/rotary events and there\'s hardly any cars about when i go , lol . I want too see some modded fast ones this year so where do i go apart from South America ? :rolleyes:

[Will66]

Jap Drag Series is where several of the quick rotor chaps race.