Garrett GT4082 experience?

[isijappanisi]

Hi,
 
have any of you guys had your cars dynoed with a Garrett GT4082?
Just wondering how much power this will be good for on a halfbridged 13B.
 
Thanks

[Madbadweasel]

Id say its too small for a half bridge!!

Im running one on a medium street port.....

I still hit full boost by 3.5k....

[AshRX]

as above i think a half bridge will swallow it up. T88, T51r or bigger will be better suited.

On street port expext anthing between 400 and 480 bhp depending on mods and boost level

[isijappanisi]

Thanks for the replies,
I was worried it woudn\'t be any good.
 
But that just gives me the excuse I needed to go BIGGER!
 
Thanks

[Ed_RX7]

i have a t88 gk available if you need bigger!

[m1tch]

Rotaries like bigger turbos, apparently the stock FC turbo (which has a tiny compressor) still has a hot side AR of almost 1 lol

[isijappanisi]

i have a t88 gk available if you need bigger!

Used one? And what price where you looking for?

[Ed_RX7]

£1200....just had it checked and slightly modified!!!!...no shaft play. done about 600 miles.

[jm-garage.co.uk]

Even if you went for the 4088 its still a little small for bridge port. Would run lovely and nice big street port.

[isijappanisi]

£1200....just had it checked and slightly modified!!!!...no shaft play. done about 600 miles.

will that be the same type T4 flange as the garrett turbo got?
I\'ve been looking at a GT4202, will have to decide which one to go for, the GT4202 is a bit cheaper.. and brand new.

[AshRX]

on a half bridge ideally you want a T88 GK, T51r, or GT4202 or bigger.

I run a GT4202 on a half bridge and even that isnt enough lol

Ed\'s GK will be perfect as it spool like nothing else

[scratchies]

do you have 4082 and if so is it new or used and is it for sale if you go bigger thanks stu

Thanks for the replies,
I was worried it woudn\'t be any good.
 
But that just gives me the excuse I needed to go BIGGER!
 
Thanks

[isijappanisi]

do you have 4082 and if so is it new or used and is it for sale if you go bigger thanks stu

I have a GT4082 yes, and yes it\'s for sale.
It\'s been used half a summer, and on very low boost as the engine wasn\'t mapped yet.

[isijappanisi]

on a half bridge ideally you want a T88 GK, T51r, or GT4202 or bigger.
 
I run a GT4202 on a half bridge and even that isnt enough lol
 
Ed\'s GK will be perfect as it spool like nothing else

What kind of power are we talking about with a T88 GK on a halfbridge engine? With supporting mods.
 
And how is your GT4202? Is it as laggy as people say it is? My car will be setup for track use, but must be usable on the street as well..

[AshRX]

i get boost at 3k and full boost by 4800, but have full boost and power all the way up to 9k. Once it hits bloody hell its a kick and a half and will give you a big smile.

Cant be bad as Darren used the same turbo and set up as me on his Pro Time Attack car

Just need to keep it in boost. Easy just drive at higher revs

GK best bet will be speaking to Ed or JayDee but 500 easy and it does spool very quickly