Air filter

Started by davyv, March 14, 2009, 09:13:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

davyv

I am after a new air filter for a GT35r. What do you recomend and where to buy one from, thanks.

slingo

ive been looking for one for my to4 for ages and ended up buying a h.k.s filter ,they do a 100mm fitament if this helps

leeincivic

if its the 100mm inlet ya need i have been using a \'green\' one, seems to be workin good:Laugh
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

m1tch

Don\'t forget to oil the HKS mushroom regularly, or you will find it dries out and the turbo starts nibbling at the corners of it lol

leeincivic

where is the best place to get hks mushroom for my t51r? thats 100mm inlet too?
THE POLICE NEVER THINK ITS AS FUNNY AS YOU DO!:Thumbs-up

HKS T51R KAI, APEXI PFC, BLITZ NUR-SPEC, WALBRO FUEL PUMP, GREDDY FMIC, SARD FPR, 1600CC INJECTORS, GREDDY ELBOW AND PULLEY KIT, MUCH BODYWORK TO BE DONE:eek:      

470.2 FWHP / 405.6 RWHP / 394.3 LB/FT    AT 1BAR :Laugh

BRIDGE PORT AND REBUILD TO COME:3gears-rh

Jono FD3

Good old trusty K&N cotton!!
You can actualy go on to the K&N website & get the dimentions you need. or the closest to what you need!! you would be looking at a universal one for that, then all you need to do is go in to a motorfactors & say Iwant a K&N... the part number is: 07-8738 and then in 2 bays it should be sat on their desk ready for you ;)

Link for all the round taper cone filters they do: http://www.knfilters.com/search/univcone.aspx

Jono

BlitzBoy

Quote from: m1tch;591287Don\'t forget to oil the HKS mushroom regularly, or you will find it dries out and the turbo starts nibbling at the corners of it lol

you dont oil a HKS foam filter! you just replace the element when its done
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

neil_jdmr

I agree, Or this is what ive always done anyway new elements every year pretty much, Why not for £30 a pair.
Standard sequential, standard engine, Oem body, 1.2bar, WI

Twins retired. KKK K27 1.25bar courtesy of Jason and Stu