Over cooling?

Started by od404, November 30, 2007, 10:35:44 AM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

od404

Hi all,

Not sure if I\'m just being overly cautious, but here goes...


I\'ve owned my FD for just over a month now, and in the past few weeks I\'ve noticed some strange readings from the stock temp gauge.  Now it has always sat at just under 90deg once warm, but recenty I\'ve noticed that when driving steadily (say 60mph cruising on the motorway) off boost, the needle drops away and usually settles just about the second white mark (at the cold end of the gauge).

It started doing this when the weather got colder, but I\'m not entirely convinced that\'s the reason (or could it?).  The car has got a Billion Aluminium rad which may be helping keep temps down.


My current thinking is that it may be thermostat related, and I\'m going to try to get my hands on a Commander for my PFC (car never came with one) so I can see exactly what temps are being recorded.

Has anyone else experienced this in their FD?

nikp

Not seen this myself, but overcooling needs to be investigated. A Commander is a good idea as that will show the exact temps, and maybe an after market water temp gauge for the radiator. You will see slightly cooler temps this time of year, but it still shouldn\'t drop to below 80/81 when it is up to temperature.

RemarkLima

Sounds like the thermostat is stuck open TBH. Just means too much water will flow round the rad on cruise mode, where you\'ve got light load and good airflow.
Montego Blue 94 R2 FD3S... Bling not included.

od404

Quote from: RemarkLimaSounds like the thermostat is stuck open TBH. Just means too much water will flow round the rad on cruise mode, where you\'ve got light load and good airflow.

Yeah that was my thinking too.  It doesn\'t take much to get it back up to where it should be though, just requires a bit more thought with regards driving style.

RemarkLima

Almost 100% thermostat stuck open if it goes to where it should be, especially once you\'ve slowed down.

Of course IMHO ;)
Montego Blue 94 R2 FD3S... Bling not included.

od404

Yeah, park up and let it idle and it sits where it should.

neil_jdmr

Quote from: RemarkLimaAlmost 100% thermostat stuck open if it goes to where it should be, especially once you\'ve slowed down.
 
Of course IMHO ;)

Yes 100% agree with RemarkLima your thermostat is stuck open and more than likely new one required.
 
About £40 from mazda
Standard sequential, standard engine, Oem body, 1.2bar, WI

Twins retired. KKK K27 1.25bar courtesy of Jason and Stu

Rzla

arent the stock temp gauges meant to be cr@p ?

SmbFD3S

Only because they aren\'t linear so if the needle sticks in the middle this can show anything from about 80 deg to 100 degrees thats all but it should remain slap bang in the centre nonetheless.... Agree with the other posts that it\'s gonna be a stuck open thermostat :Thumbs-up
\'92 UK RX7 FD
\'97 Kwak ZX6R currently at Stage 3
\'86 Honda CRM250R stroker
\'11 BMW 320d ED
 
 

arrouk

this time of year i NEVER see over 76-78\'C water temps unless i leave the car to idle for a while.

matt

SmbFD3S

Thats strange being as the standard thermostat dont actually open until until 83-84 degrees....
\'92 UK RX7 FD
\'97 Kwak ZX6R currently at Stage 3
\'86 Honda CRM250R stroker
\'11 BMW 320d ED
 
 

shaunwil

Are you sure it hasn\'t got the lower temp thermostat ??

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

arrouk

no just a standard mazda.
just a thought but is the pickup for the pfc on the flow or return side of the rad?

matt

Jit

hmmm thats wierd...my first car had no thermostat in it when i removed the lump...the needle was always poiting to the same place.

Jono FD3

My temp needle on the std gauge always sits in the middle.... but since I have had my power FC fitted the comander tells me that I am running 70 - 73c (with thte std gauge sitting in the usual position!!)

Going to check my thermostat now!!!

Jono