Group Buy - Poly Engine Mounts for FD £65 delivered with enough interest!

[Bobfish]

FD Poly Engine Mount Group Buy

These are similar to race versions but include the lower poly washer which virtually eliminates vibrations. This results in a stiff mount that\'s perfectly suited for daily driving. All mounts come with install instructions and new hardware.

Benefits of poly mounts:

- Reduced engine movement
- More accurate gear change
- Prevents 5th gear synchro problems
- Prevents PPF problems
- Firmer launches
- Higher resistance to heat
- LAST THE LIFETIME OF YOUR CAR GUARANTEED!

PRICE:
1-5 - £80 delivered
5-10 - £75 delivered
10-15 - £70 delivered
15+ - £65 delivered

PAYMENT:
Paypal is preferred to: squattingnevil@hotmail.com
Cheques are also accepted, Email me at carl.newton@affiniti.com for my address.
*Please send £80 to secure your mounts, if quantity results in a price decrease your refund will arrive with your mounts*

Please note, this offer is for UK buyers ONLY.

[ro284]

Possibly silly question, Are these able to be fitted without removing the 3 bolt alloy Rubber mount housing that bolts on to the sump,??should they be fitted as a pair?
Cheers Bob

[J.j.]

Has anyone tried out a set of these?  Would be very interested in some first hand feed backs :cheers

[Bobfish]

Bob,

Not a silly question at all. These mounts replace the rubber inserts on the 3 bolt alloy arm part. Depending on the year of your car this may be as simple as unbolting the old mount, and bolting this one on. It certainly will not be more complicated than drilling a hole and shaving a few MM of material off the poly mount itself.

All will become clear with the installation instructions...But i can confidently say with the correct tools it will take no longer than 1 hour from the time you remove the old mounts until the time these are fitted to the metal arms and ready to re-install.

And yes, they should be fitted as a pair.

[Bobfish]

Has anyone tried out a set of these?  Would be very interested in some first hand feed backs :cheers

These are coming from a US vendor.  Here is a little feedback from a man who has tried them:

I just installed these today, after having them laying around for months. It was a great upgrade. My engine does not move at all when I rev it up. ALso, the vibration is minimal. Only the driver can feel it. You also only really feel it when you step on the gas. I actually like the vibration. It gives the car a race car like feel. SO, if you have heared anything about these mounts that Cody is selling to be too stiff. Those claims were made by babies. My buddy rode with me and said that he didn\'t even notice them. It only took us about 1 hour and 20 minutes to do the swap also. Great stuff Cody.

[stylus350]

Whats the timeframe to get orders in?

[Bobfish]

The sooner the better, but ill give it two weeks from now for the first batch (which will include the price reduction if numbers are high enough)

So guys, orders must be in by Wednesday 4th!

[ro284]

Bobfish, Not a silly question at all. These mounts replace the rubber inserts on the 3 bolt alloy arm part. Depending on the year of your car this may be as simple as unbolting the old mount, and bolting this one on. It certainly will not be more complicated than drilling a hole and shaving a few MM of material off the poly mount itself.

All will become clear with the installation instructions...But i can confidently say with the correct tools it will take no longer than 1 hour from the time you remove the old mounts until the time these are fitted to the metal arms and ready to re-install.

And yes, they should be fitted as a pair.

Thanks for that Bob, the reason i asked is that if you have to remove the 3 bolt assembly (metal arms) off the sump, i believe it can lead to a difficult to cure oil leak!

if thats not so something else in thier favour!
cheers Bob

[Bobfish]

Sorry bob, i misunderstood you. In most cases YES you WILL need to remove the 3 bolts from the sump.

However, in my experience this does NOT lead to an oil leak. Sealing the sump up liquid gasket without these 3 bolts installed to the proper torque leads to an oil leak, as does removing the sump monkey fashion (hammer and screwdriver like)

You should be ok removing these 3 bolts after the sump sealer is set. I was!

[ds2000]

Will probably be in for a set, don\'t get paid till the 28th though

[Bobfish]

Just so you know (as an incentive New engine mounts from mazda are 192.72 +VAT Each from mazda.

[rob]

I\'ll be interested

[efiniste]

Put me down for a set. I\'ll pay you when you come up for the turbos if that\'s ok?

cheers,

Steve

[Bobfish]

Interest list:

efiniste


Please add as appropriate.

[ds2000]

Interest list:

efiniste
ds2000

Please add as appropriate