air fuel ratio/settings/readings

Started by rx7veilside, February 14, 2006, 05:23:39 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

rx7veilside

just installed a innovate wide band afr gge and lc1
on idle afr is 11.8 when on idle enrichment and settles to 12.0 when warm and on idle..car has 550 primary/1600 secondaries and is street ported..just wondering whether this could be leaned out a bit on idle as seems a bit rich.using apexi can u lean out the idle and cruise cells without leaning out the on boost area..(i wont be doing it i hasten to add just in case someone thinks i know what i am talking about)..i thought idle afr shd be around the 14.0 area or s this just for a piston car

Carl

#1
If you join the club we\'ll tell you! Judging by the number of post\'s you have you are not exactly a casual user.
Regards
Carl

kev-yorks

Regards Kevin

bnaellis

Yes you can lean it out to idle at 14.0 without affecting the other cells, using the apexi.

rx7veilside

thanks brian for the info..i know i should join but i also frequent passionford.com/scoobynet/supra owners/rx7club.com/nopistons.com/turbosport.com/bbs.rsowners.com plus a few others as i am a car fanatic first and rotary owner second

FD3UK

I think you will find around 12 is the best for a smooth idle. If you aim for 14 idle will suffer.

I have uploaded the Mazda target mixture map (taken from the Datalogit site) and you will see there is only a small cruise area that the have 1\'s which is Theoretical 14.7

Clicky


Kev

rx7veilside

interesting how did the rx7 ever pass emmissions as i only have standard 550 in my primaries which give co reading of approx 6.0% that leaves an awful lot of work for a cat to clean up which is why i thought standard rx7 must have a leaner idle

Wav

Quote from: rx7veilsideinteresting how did the rx7 ever pass emmissions as i only have standard 550 in my primaries which give co reading of approx 6.0% that leaves an awful lot of work for a cat to clean up which is why i thought standard rx7 must have a leaner idle


Two words... Air and Pump ;)

Paul :p

sdminus

I get a basic idle of 12:1 afr on 850cc primaries. It would seem that you can remove some fuel from the cruise areas of the fuel map. But i  have found this to make the car harder to drive and a bit jerky for my liking.

Scott

gmogle

Quote from: sdminusBut i  have found this to make the car harder to drive and a bit jerky for my liking.

Scott

Think thats your right foot doing that mate lol

royston1xx

Quote from: CarlIf you join the club we\'ll tell you! Judging by the number of post\'s you have you are not exactly a casual user.
Regards
Carl

Why do people keep coming out with this non member predujice on this forum when at least 70% of all posts  that are here to help each other came from the (non members) in the first place. Including me!  :flamed

Carl

Quote from: royston1xxWhy do people keep coming out with this non member predujice on this forum when at least 70% of all posts  that are here to help each other came from the (non members) in the first place. Including me!  :flamed


Well I guess that it has something to do with the fact that this is a club.
It is based on people paying to be members.
It is not a prejudice,just seems that there are alot of freeloaders on here.
This will be tidied up very soon,so there will no longer be a problem anyway.
The amount it cost\'s to be a member has got to be worth it just for all of the money people save on advice.
It is a pity that the non members do not appreciate one simple fact,this club and forum is not free,it is paid for by the paying membersSo why should all of those paying sell themselves out with good info to those not paying?
Regards
Carl

rx7veilside

but all the other forums are open and free this is the only one where membership seems to be an issue.now i agree the 25.00 is not a lot of money but if i had to join every forum i wld be paying about 300.00 a year.i dont consider myself a freeloader as if i can offer any help or advice over something that has happened to me then i do.thats what i thought the forum was for..i can only assume this is going to become a members only club soon by what carl has said.i hope it doesnt destroy itself in the process.i have never seen this become an issue on other forums..just tallied up and i am a poster on 12 other forums from fords to subarus/toyota/v8s but i drive a rotary and if there was some info i could pass on to a ford/subaru owner ect thru the forum then i would be happy to do so

royston1xx

Quote from: CarlWell I guess that it has something to do with the fact that this is a club.
It is based on people paying to be members.
This will be tidied up very soon,so there will no longer be a problem anyway.


Why didn\'t this happen from day 1 then? Would of saved a lot of bitching, wouldn\'t it.

Basically though the paying members get discounts for entry to events and vendor/insurance discounts etc and non members don\'t. Kind of evens up in the end though doesn\'t it?  :wave

Carl

Many other clubs have this policy.
Someone like you Royston and you RX7 veilside would obviously be an asset to the club,so why not join?
Regards
Carl