changing rear bulbs

Started by Jodypamplin, January 28, 2006, 02:35:27 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Jodypamplin

How is this done? Have heard that it is simply unscrewing the screws and sliding the cluster off to access the bulbs but this has not been successful so far!

Can someone provide a clear process of how to do this?

Cheers

McCARTHY

unscrew the three srews that hold the black plastic cover (the bit in where the boot lid sits) Then you just pull they will be very tight..... if you look down the back of the light you will see that its held in by two clips.... these just pull off but they are very tight .....

hope this helps

Mazdarotaryparts

Quote from: McCARTHYunscrew the three srews that hold the black plastic cover (the bit in where the boot lid sits) Then you just pull they will be very tight..... if you look down the back of the light you will see that its held in by two clips.... these just pull off but they are very tight .....

hope this helps

BTW the light units  pull off sideways toward the outside of the car.
REgards
Clive

Mazdarotaryparts
Racingbeateurope
Racecarbattery
shyauto

We aim to help and assist our customers make the right choices for their Mazda Rotary or MX-5  whether they be standard or modified. If you need further assistance with your inquiry, please do not hesitate to contact us:-
sales@mazdarotaryparts.com T:- 44 (0) 1474 361 800
sales@racingbeateurope.com T:- 44 (0) 1474 777 800
sales@shyauto.com             T:- 44 (0) 1474 771 800

Jodypamplin

Cheers fellas, have done it now, but I was a little reserved about yanking on the lights too hard - sorted  :)