Terminal speed, target 100mph. Entry Rules.

[Brett]

The FC 100mph challenge

As we have had a few people asking if they can enter too we thought we had better come up with a set of rules to keep the competition fair.

Rules of entry

1) Only Mazda Rx7\'s with an FC chassis number are eligible for entry.
2) Only cars running the 13B or 13BT engine are eligible for entry.
3) Turbo charged cars MUST run with standard internals.
4) Turbo cars must run with the standard Turbo.
5) Turbo cars must run with the Top mount intercooler in place.
6) N/A cars may run with mild street porting and Baffels removed.
7) All cars must run with stock FC gearboxes and differentials.
All cars must be in full street trim. (Ie no stripped interiors)
9) All cars must have a valid MOT certificate.
10) No drag tyres.
11) No nitrous oxide systems.

 These rules are by no means exhaustive, but will not be added to or changed without prior consultation with the entrants.
 
 Another more unofficial rule is that you must stick to a sensible budget, I doubt Stu and I will have spent more than £500-£750 on modding our cars, we request you do the same.  
 All entrants must submit a full spec of their car, on this thread no later than 2 weeks before Rotorstock 3 takes place.
 All entrants cars will be inspected for safety and foul play before they take to the strip.

How the competition will work

 All cars will have a maximum of 3 runs on the day.  After these runs the winner will be the person who has either
                                     A) Broken the 100mph TS
                                          or if more than 1 person breaks 100mph
                                     B) Achieved the fastest TS over 100mph

  In the event of a tie the winner will be determined by ET, then fastest reaction time.

 I doubt there is going to be much of a prize, but there is a lot of pride at stake here.  This is as much about ingenuity and determination as it is looking for a winner.

 Good luck, play safe and have fun!

 Brett  :3gears-rh

[sadgoth]

you seem to have 2 rule 3s!

I guess I\'m not eligible under rule 3 (the first one ), rule 4 (soon) and rule 7! oh well I\'ll just have to run for fun then! lol

[grinder]

i like it brett - i really do

made sticky

£500 - £700 yeah right - more like under £100 for me LOL

[J4P RX]

Whats a standard terminal?  Wouldnt of thought it far off 100 in the first place?

[sadgoth]

low to mid 90\'s

[grinder]

my best was 91 and 93

at 15.07 and above

that was a STOCK car apart from the main decat removed ... its changed a bit since then but didnt run at RSII

[Brett]

Its the change from 3rd to 4th that kills the TS, see the main thread in chit chat

[Jit]

so i suppose my kaaz diff puts me out? I would have joined by then too

[borgue]

can i enter my fb 12a?

Ollie

[grinder]

sorry matey - FC only

or so brett says !!

[borgue]

but its old and only 1200cc and no lsd!

[sdminus]

How come only FC. i could understand if it was fd.........

Scott

[grinder]

hang on chaps

anyone can run the strip as RSIII

brett is just trying to get the FC guys to run - there was only 3 that run last year ( maybe 4 ) - rest were FD\'s

this is just a little compo for the FC guys

it wont effect how RSIII is run - its just for a little fun

and a stock FD will run 100mph + anyways !!

[sdminus]

I Know. Borgue is running a FB tho.

Scott

[Grizzly]

What is you definition of Std? Does this mean mazda\'s own or Bolt ons? (Filters,Exhausts Ems?)

I don\'t quite understand if you say standard? I can\'t think of anyone off hand that has not got a Aftermarket part fitted? or had there engine rebuilt useing Fd seals etc does this mean they can\'t run?

I think you need to make it clear what is and isn\'t par for the course. I know its for fun an all but whats stopping somone fitting a Fuel Computer and injectors and running 20psi on a stock car with cats etc?

If not are you promoting unsafe tuning? bolt ons without Ems mods?