Power FC vs kickplate

Started by ScuttleRX, July 14, 2005, 02:41:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ScuttleRX

Can anyone actually get there kickplate to fit back in properly when the power fc is fitted, i\'ve trimmed bits of mine off but I still cant get it to fit like it originally did, wasting my time?

Donato

Like a glove.

Is your PFC fitted near enough where the original ecu was?

ScuttleRX

Assume so, I didnt put it in myself so not sure...I can get it near enough in place, and it stays there, just one of those little niggles. Thought the power fc might be wider than original or something but I guess not

Donato

from memory its not any bigger, might be worth taking the panel off and seeing if you can get it to fit any better, if you cant get a photo, and im sure someone will be able to tell you, if i remember right on mine its just held on with velcro pads in the original stock position and the panel fits fine...maybe they have mounted the ecu in a slightly different place...?

andyrose

no prob with mine although i hav\'nt got brackets on the apex (standard ecu has brackets) managed to fit it and put some self adhesive foam strip on the inside of the cover to give some kind of protection.

clive

Hi Andy,

 Have you left the original stock bracket that bolts to the stock ECU, if so take this off the body, then the Apexi will then sit nicely on the sill ledge and allow the trim cover to fit back properly into its original position with all the correct clips fitting how they should

Hope this helps.
All the best Clive

ScuttleRX

I\'ll take a pic in a bit, panels off im still routing cables everywhere :)

ScuttleRX

Heres a pic chaps, ecu is mounted onto a black box same sort of thickness with a few wires going in the side and on the top

ScuttleRX

so you dont have to hurt your neck...!

asp

what the black box 4?alarm mayb.thats probly y it dont fit proply

ScuttleRX

Dont know whats it for, assumed all cars had it, obviously not.....

Gerry M

I sat mine in the original ecu brackets, kickplate fits on no probs
The tartiest rx in scotland

Donato

Quote from: ScuttleRXDont know whats it for, assumed all cars had it, obviously not.....

I dont have a black box either...could be the source of the problem..

Oedipus Rex


ScuttleRX

mmm, I best find out what it is then and where I can re-locate it :)