Rays Volk Racing GT-C Face 2 and "Attachments".

rextreme · January 14, 2005, 11:42:38 PM

Just saw this thread.

That kit is nice, I have seen a couple.
Now I know why the feed reference in the other thread.

The off sets you chose will be fine.

Remember if you want the car a bit lower the Feed +18 deal. you have to keep the car very high and they do stick out a tad.

I have the RE-Ad kit as you know. I have +40 front and +30 back with a small 5mm spacer on the front.
and i have a 30mm spacer on the rear. to get it almost right.
The front could have anther 5mm maybe.

The car is quite low and I dont get any rubbing on the guards.
I trimmed the rear guards but I havnt had to fare them and the original metal is still there. just fit under.

and it does affect the handling quite a lot with spacers. less inclined to poke out the rear. and changes the roll characteristic a little. I have 225/255 on 8.5/9.5 for almost zero sidewall flex which works well.

some eye candy.

ps, tHE TE37 i tried in my avtar<<<- were + 12 / and +15. with 255 front and 275 rear. No way would they fit. there was about 3mm clearance on the rears. and fronts were almost ok with high ride hight, would have changed the tyres but.
didnt end up getting them.They were from a GTR.

Russ.

This was the first guy to get the feed kit.

rextreme · January 14, 2005, 11:43:29 PM

rear

rextreme · January 14, 2005, 11:44:43 PM

and the race car...

These pics were at 2003 fuji power tour sevens day +24 OFFSET

rextreme · January 14, 2005, 11:48:31 PM

04 auto salon +18 18x10 255 all the way

rextreme · January 14, 2005, 11:49:27 PM

PS you cant these Advan RS wheels yet

chrisBoid · January 17, 2005, 01:31:09 PM

Hi Russ,

great info and pics as always

Put the wheels on today and they look spot on and with the wide arches on - road legal!

2-3 weeks in the body shop now...

Without the wide arches on: -

chrisBoid · January 17, 2005, 01:35:10 PM

.

rextreme · January 17, 2005, 08:44:13 PM

youll have to get it a bit lower now

hehe.

hope they dont take too long.

are you going to trim the guards a lot?

chrisBoid · January 17, 2005, 09:06:31 PM

I\'d like to lower it, that\'d be a nice excuse to upgrade my suspension; but my drive is too steep

I\'m hoping no trimming of the guards is needed...

rextreme · January 20, 2005, 08:32:05 AM

I just had to trim the inside of the guards Ill take a pic.
soon