Clive's 400 BHP Super GT RX-8 Race Car

Started by clive, April 29, 2012, 05:00:49 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mr Spiller

Well
Done Clive
Currently catching up as the Tapatalk app has blocked me out of the forum
And RX8 one too
Good luck


Sent from my iPhone using Tapatalk

Casey

A few hairy moments, otherwise a fairly "lonely" race  ;)

Well done Clive, I hope the engine is OK.
RX-8 230 Bridgeported: Racing Brake Disks & 4 pot front calipers,Full Racing Beat (RB) SS Exhaust system,RB ARB's F & R,RB REVI intake,Tein MonoFlex Coilovers & front strut brace.
RX-7, KIMI 1, 1st Gen S2, Silver,1983 - SORN
RX-7, KIMI 2,^^Ditto - now sold
RX-7, KIMI 3, 1st Gen S3, Red,1984

clive

#3752
Couple of decent pictures from last weekend below.

Really rubbish race fighting all the time with the gear box, no flow unable to concentrate on being smooth = junk lap speeds !

"Hopefully" after mailing Grebe who made the box and finding I have been running the wrong viscosity oil, so maybe now the thing will change down. Looking for a better showing at Brands and if the box is still not playing, I will pull it and get it stripped.

As I was a little worried about the engine with its new pair of housings costing  £1500, so since the last post the engine has been out, stripped checked and sitting back in the bay, Thanks go to Steve for giving me a hand getting the engine lifted in and out plus Milling my manifold flange as we had a bad blow at Combe.

Looking forward to the next event at Brands that has now become a three day event with a full day test on the Friday, four half hour sessions should run it in properly.

Testing July 30th Racing July 31 / Aug1 Brands Hatch Indy   

All the best Clive

boosted

Yay
I reckon a few seconds to be had once that box silky smooth.

Sent from my SM-N950F using Tapatalk
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Eccentric shaft

Sounds promising! Go get them at Brands!  :great:
Hmmmmmm over braps

Mr Spiller

Good news on the engine
Best of luck Clive


Sent from my iPhone using Tapatalk

clive

Pleased to announce that Tein have sponsored the RX-8 with one of their excellent Mono Circuit Racing Coil over kits, which is a newly developed product.

After seeing the picture posted from Castle Combe with the front wheel nearly off the ground I decided I had to do something ! and Tein have come forward to help.

They had sponsored me in the past with their amazing EDFC system which allows me to change damper settings on the move, to adjust understeer and oversteer, it's also great for making the dampers softer if it rains. Been selling Tein products for the last 20 years with never an issue, so I am looking forward to setting this up for Brands in two weeks time.
All the best Clive

clive

Armed with my new suspension, I'm out at Brands this weekend with Thunder Saloons
Testing all day Friday then racing Saturday and Sunday  (Timetable Attached)
All the best Clive

Eccentric shaft

Thanks! Will be following the progress. Have fun!  :great:
Hmmmmmm over braps

MattScott

Hope your dog 'box plays nicely too !

Sent from my SM-T825 using Tapatalk

RX-7, FD S2, JDM, White, 1994

clive


Thanks guys.
If the box still wont play ball I will pull it out after this one!.

All the best Clive

boosted

Hi Clive i cant make this 1 to much on at this end. Ill have fingers toes and arms crossed.

Sent from my SM-N950F using Tapatalk

92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Casey

#3762
Good luck Clive, I hope all goes well with the testing and races too  :13:

Sadly, I won't be able to make it to Brands. I have to put the front end of my FB back together tomorrow in time for the Phil Blake event on Saturday. Decided to take care of some surface rust on the front end whilst I had the bumper off to sort out after a minor ding. All progressing well, but taking longer than I had planned  :-[
RX-8 230 Bridgeported: Racing Brake Disks & 4 pot front calipers,Full Racing Beat (RB) SS Exhaust system,RB ARB's F & R,RB REVI intake,Tein MonoFlex Coilovers & front strut brace.
RX-7, KIMI 1, 1st Gen S2, Silver,1983 - SORN
RX-7, KIMI 2,^^Ditto - now sold
RX-7, KIMI 3, 1st Gen S3, Red,1984

Mr Spiller

Have a good day testing
And race too


Sent from my iPhone using Tapatalk

clive

Had a good day testing, in wet dry conditions

Last run of the day spent 1/2 an hour on it and came away happy especially with my Michelin intermediates that operated on a soaking track and weren't bad when the track rapidly dried.

Checked the color of the plugs plus  the compression and all is good

   Saturday and Sunday in the CTCRC BOSS/Thunder series racing under new race number #787

Saturday:-
Qualifying 10.20
Race 4 15.05pm

Sunday:- Race 13 - 14.40pm


   
All the best Clive