BOOSTED FD BUILD.

[boosted]

Im gonna have a good look over the car...poss arb link broken etc...i did go in quick mind...was over driving but it has shown up tad soft...physics cant be bent...

Sent from my SM-N950F using Tapatalk

[re japi]

Watched that vid, again. Nose seems to be doing what you want, quite nicely... Changed caster and/or camber or some setup lately?

Going for harder front springs may cause understeering...? But harder for rear, worth a try I reckon...

But I really think that those rear coilovers needs attention, I think problem lays there...

But still, that car is bloody fast and you can handle her! Good job mate!

Lähetetty minun E2303 laitteesta Tapatalkilla

[boosted]

I feel its gone backwards with going to a048s and r888r over the r888s...need to match the tyres and stiffen up i think...all the fleet have issues atmo  lol...noise from Westy, eunos ecu dead  fd rad punctured...ha ha...amazing how things change...

Sent from my SM-N950F using Tapatalk

[re japi]

...bugger... 

[boosted]

Its alright, Clives on the case with Fd, rad being repaired, fan pack free from Wayne on rx80c.
Eunos 2nd ecu and 6" of loom with plugs £80 off ebay.
Westy, cant find source of noise, run it and let it manifest abit til its obvious what it is..

Sent from my SM-N950F using Tapatalk

[boosted]

Thanks Clive, Rad fan back, do like looking at ally welds looks very nice.
So idea was to use rx8 rad pack with the R3 koyo rad but ive custom V mounted and was using a hi power slimine Spal fan before...(thats now living at Combe)  But as ive flipped rad so coolant pipes are on top i cant use existing mountings as fans will blow wrong way, reversing polarity just stalls air so thats no good, and there is no way to mount them underneath as they are so big and foul existing brackets which would mine coolant pipe redesign etc, so looks like in the market for an aftermarket slimline fan..so prob off to Merlin with rad and offer some fans up...but need a proper mounting solution....its fallen off once!!! and aftermarket fans can be set up to push so it can go on top and then cant fall off lol...........but not today im feeling ill so off to bed!

[boosted]

Well stubborn mofo..after 1/2 hr in bed drove to Merlin and got a Craig David rad fan...mounted on top to push through..so cant fall off...alll bled up....out for a drive all good...85 degrees stable.

Sent from my SM-N950F using Tapatalk

[Casey]

Back in action again, excellent 

[boosted]

Yep, this engine still going...lol..its remarkable...

Sent from my SM-N950F using Tapatalk

[boosted]

Forgot to update, stutter fixed on eunos, not ecu not immobilser, cam angle sensor, idle air control valve, not fuel filter, not coil pack or leads or plugs...all changed or removed...
It was a badly adjusted tps..which has a idle switch incorporated into it....now running lovely jubbly.

Sent from my SM-N950F using Tapatalk

[boosted]

Just been out and checked coolant level, all good, rad repair dry as a bone, Thanks Clive for sorting out for me..

[clive]

Please all is well with the Rad, you could see he did this properly for you.

My old mate Tim is a real clever guy, worked as a fabricator for Brabham F1 for years, on the Piquet car pictured I know he fabbed the roll bar wishbones etc along the way 

[boosted]

Well confirmed 8kg spring in rear of fd and both rears im hitting in corners,,, too softly sprung? Its always wallowed abit but judging by last outing photos it more than i thought.

Sent from my SM-N950F using Tapatalk

[boosted]

And got the road wheels refurbed, finally summoned up the energy to get em on, my roadwheels now back in black, try and get the car looking half decent for 7/7 day.


Sent from my SM-N950F using Tapatalk

[Dax]

What suspension setup are you running now? I will go back over your posts but just to bring me up to speed quick lol as for your road wheels I very nearly bought a set the same in gold with chrome lips and I have to say the colours worked


Sent from my iPhone using Tapatalk