New Engine Project

[exiled-viking]

Yep 1 mm cutting disc just blew apart,should all be cleaned out by I hope Wednesday off to Moorfields to see a top bloke  need to be ok cars on its 10 year mot Friday the week after.

[exiled-viking]

So the Eye is fixed and I can see A little better Took the Car out of the Garage today and made the next part of the Washer tank Mod which is the Mounting plate for the pump motor and the Electrics, will mount the tanks when they come back from being Carbon fibre Effect Hydro Dipped. a Quick few pic,s the Plate will be sprayed stone chip black when finished also going to fit a small LED light pointing at the Dip stick Holder tube.










Blue film to be removed and the spraying up in black later, post more pics next week when it all gets fitted together.

[exiled-viking]

A bit more Done Today paint and fitting just the Tanks to fit and then installation into the Car. 

[C J R]

Lovin' the quality of your work Tony 

[exiled-viking]

Thank,s Chris been getting Her/It ready for its Ten year MOT Friday also Going to use the garage,s facilities to fit the New Up Graded Fuel Pump . Hoping this is going to be the last mod for under the bonnet for this year, as I want to get forward on the New Front End

As I got A spare one of these and Its going to get the C**P tricked out this time Going to make 80% of the mods my self

[exiled-viking]

More of the Build Mod done today Tanks back from wicked coatings spent the day fitting the mazda parts  (two pump motors Headlight and windscreen and the float level sensor) to the tanks and making sure there where no leaks, will fit it to the car later in the week.

[re japi]

Wow, those has to be nicest "bottles" I have ever seen... Good Job!

[exiled-viking]

Car On its Ten Year MOT today yes it passed also fitted new fuel Pump could tell the difference in performance  replace One or two other small Items. well pleased with to day  now I can fit the screen/headlight water tanks, then get ready for the cleaning of the under body of the car.

[C J R]

Brilliant Tony...  That's enough plaudits ...now get started on yer spare front end 

[boosted]

Hi Tony what sort of costs involved with wicked coating carbon....i have a nice clean rx8 plastic inlet plenum sat in my rebuild box !

[exiled-viking]

Hi Tony what sort of costs involved with wicked coating carbon....i have a nice clean rx8 plastic inlet plenum sat in my rebuild box !

what I would do is give them a call or they have on there site and email set up where you can get a quote buy posting a few photos of what you need they also would need to know what coating you would need there are quite a few carbon effects you can chose from my tanks where cover,d in carbon effect coat YH143

wicked phone number 01202622258

each job comes with its own price but the quality of work is very good I had a small problem with one part 15 months after they just took it back and redid it on cost only postage one way. I cannot fault them hope this helps a little,

[boosted]

Cheers Tony ill check em out.

[exiled-viking]

WELL GOT a few hours to do a little work fitted the new screen wash tanks and tested the float sender unit and dropped the tank level to 1 ltr and yep the light comes on the dash  tanks hold around 3.5 ltrs also got a few other things done pic heavy engine look for 2016 now Almost done 

2016 Engine bay lay Out









Inspection Light fitted










well almost ready for the season new fuel pump in and some ssv hoses  replaced some lighting mods to do at the rear of the car and then I can start the front bumper mods LOL

[boosted]

Tony your the man to speak to about dash cams? Want to put 1 in Mrs mps ....motion detect. Night vision etc 1080 p...there cheap as chips on ebay but you gets what you pay for.
What would you recommend...happy to spend upto a £100.
Ive just had to diagnose a rattle to find 3 rocks rattling around on top of top ic....some pesky kids have put rocks through bonnet air intake for ic....if i had video....
Any advice much appreciate....it will be hard wire in...Jon.

[exiled-viking]

Hi Jon I just Bought Amanda the snooper as it has GPs but only has 120 deg as the transcend ha 120 up to 160 but Amanda chose it In the end the price is around the same I had snooper stuff before mainly speed detectors, but this is easy to use  Halfords have a good range and wait till the have one of there offers and you can get a good buy I would recommend you having the GPS auto switching on you can hard wire most of them there are ones on eBay but you get what you pay for. the snooper saved another 15% off insurance as well.



links below


http://thurgo.co.uk/item-43519-snooper-dvr-1hd-mini-vehicle-recorder?source=googleps&gclid=CP-UlZGWkcsCFeYK0wodR90Ajw




http://www.halfords.com/technology/dash-cams/dash-cams/transcend-drivepro-200-dash-cam?cm_mmc=Google+PLA-_-Dash+Cams-_-Dash+Cams-_-164883&_$ja=tsid:60494%7Ccgn:GoogleShopping%7Ckw:164883&istCompanyId=b8708c57-7a02-4cf6-b2c0-dc36b54a327e&istItemId=lxlmppawm&istBid=tzql&_$ja=tsid:35522%7Ccid:344535124%7Cagid:25438436524%7Ctid:pla-211149673684%7Ccrid:89806882564%7Cnw:g%7Crnd:14373944122026269341%7Cdvc:c%7Cadp:1o1&gclid=COTJ4eaVkcsCFcfgGwodw18Bug


But If I was to have any then this is what I have and I fully recommend it I now Its pricey but i got mine when i bought the road angel Gem and had a deal

http://www.speedcamerasuk.com/road-angel-halo.htm