Don\'t start fd3s with clicking

Started by brundish24, October 29, 2014, 10:50:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

brundish24

As title, I went to start the fd this morning and nothing so the battery is dead then I went to jump start it and I turn the key and nothing just a clicking sound I\'m worried that I\'ve done something wrong, it\'s bog standard and it was working fine until the battery died any help. The battery doesn\'t hold a charge

neil_jdmr

Standard sequential, standard engine, Oem body, 1.2bar, WI

Twins retired. KKK K27 1.25bar courtesy of Jason and Stu

brundish24

I was thinking that I\'ve just never had a battery so dead it wouldn\'t jump lol.

Will66

It\'s completely dead, new time.  If that doesn\'t work then you might have a sticking solenoid.
RX8 High Power, Cusco Coilovers, Dotz wheels and flames. Shoe Size 12
 
Apparently putting details of your car spec in your signature means the nice folks on exile-rotorsport think you\'re a fool.  I can think of no higher compliment!

"Eat it with a chopstick!"

brundish24

Got a new battery and it still doesn\'t I\'m thinking the starter motor lol anyone change one before ?where is it.

boosted

Lh side of gearbox 2 securing bolts and 1 electrical nut. 1 elec connector on solenoid easy peasy...disconnect battery first.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

brundish24

okay thanks and is there a way for testing these or to fix them?

clive

Undo the starter pull it out and then refit.

The reason I say this because at times if the battery only has a little bit of power the starter will throw in and the gear will jam, this means the starter will just click until you get it to disengage.

The other thing to try is to put the car in gear as this sometimes also disengages a stuck starter

Hope this helps
All the best Clive

brundish24

This is all good stuff guys, thank you I will try this before I get a replacement. This is what I like about this club it\'s friendly and Knowledgeable:) keep you posted, it was going to have a mot but wouldn\'t start lol and I\'ve rebooked it for Saturday hoping to get it fix by then lol.

brundish24

turns out that it was a loose wire it seems to work now after ive tightened it lol hope its fixed.

clive

All the best Clive