R plate FD breaking & few parts

Started by J-REX, July 03, 2014, 10:22:27 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

J-REX

Hi guys,

I have a 98 FD completely stock with suspected water seal failure.

I brought the car from Martin at Speedline imports in September 2012, and 3 months later the water seal failed. Had the engine half out but time and money have been a problem, now its time to move the car on. I\'d like to get the car back on the road but just found out my partner is pregnant and can\'t justify it!

So just testing the waters on intererest on parts or £1500 will buy it complete. Its the Type RS model and other than needing a good wash the bodywork is great the drivers side headlight cover has broke and the paint has flaked abit but other than that its tip top. It has the big front brakes being the Type RS, as I said its completely stock and the mileage is just over 47,000 miles. I also have a Mazdaspeed rear spolier and RE:Amemiya intercooler hard pipes to go to. All fluids have been drained from the car and I\'ve periodically turned the engine over by hand and poured oil down the inlets to keep it lubed up!


The car just before it was off the road, I will get a current photo when I\'m next in at the workshop.


The Mazdaspeed spolier

Pic to follow of the hard pipes in the next few days.

So let me know interest in parts/car £1500 gets the complete car
£200 for the Mazdaspeed Spoiler
£75 for the RE:Amemiya Hard Pipes

Contact me via this post or my e-mail JR dot Goddard at Outlook dot Com

Regardz,
James

bin liner

#1
emailed...............
Definately want it mate but the dog has just died so will be getting the missus a new dog for christmas....
Sounds like a good deal but will have to ask the dragon first.....  :flamed  :spank

Ed_RX7

Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

Emailed I  Will buy the whole car mate.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

boosted

Thank god that\'s not being broke for parts! Well done sir !
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

J-REX

Emails sent

Car provisionally sold!


Quote from: boosted;880653Thank god that\'s not being broke for parts! Well done sir !

I would rather see it back on the road then broken down!

J-REX

The car is now again available, following the extent of the interest in the car and having giving it a quick buff I can\'t let the complete car go for any less then £2000, the following photos show it\'s worth every penny of it.

Sorry for the picture heavy post!



Ed_RX7

You said I could have first refusal......
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

JayDee

Ed, can I do the valet, for your car?
GLWTS


Quote from: Ed_RX7;881196You said I could have first refusal......

skybusr34

Cash waiting if still available 07779703330
Regards
if i had 8 hour to cut down a tree. i`d spend 6 sharpening the axe

Ed_RX7

I\'m still waiting for a response james... Have emailed you also. Ready to buy the car, have an engine ready to drop in .
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

JayDee

Ed, forget about that car the guy has been on the site numerous times and no reply, like he is waiting for bidding or something.
Bit strange why the first buyer pulled out, now it has gone up £500 for a polish


Quote from: Ed_RX7;881239I\'m still waiting for a response james... Have emailed you also. Ready to buy the car, have an engine ready to drop in .

Ed_RX7

I had noticed this too jay. I even emailed him back from the email he replied to me on so no excuses there. Makes you wonder why the first person never went through with the sale.

Tbh selling should be an exclusive right of full club members!
To help avoid all this nonsense and protect its members...
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

Last login 10 pm last night...... Still no response ..... Go figure!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

mikey-t

Hoping someone comes in with a higher price to beat you that\'s all, advertise it for what you want or don\'t bother, nuggets