Breaking Silver RX7 96+ SPEC, with some aftermarket parts Apexi ECU etc

Started by BlitzBoy, June 23, 2014, 12:42:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

BlitzBoy

I have decided to break my silver rx7 rather then fix the small 3/4 crash damage and other bodywork needs.

Engine not for sale, using that for another project, but everthing else is

Here is a list , need the the major things gone first before I start doing the smaller stuff, eg Apexi ECU, Intercooler, HKS T04E Full kit

Gearbox, syncros seem fine   160
Diff no whines   70
Rear Bins complete inc boot carpet   300
Headlight Covers each 75
Trust Intercooler with pipes   280
HKS TO4E Kit, Genuine HKS wastegate 50mm,downpipe,HKS manifold, needs a rebuild really as its starting to push a little oil   600
Quiet Exhaust but flows nicely   100
Decat    with a small silencer 75
Apexi ECU 96 16 bit   450
Mazda RX7 RS 17inch Wheels   96+ 350
Wings 60 each
DM Motorsport red Alt/Water pump Pullys   50
Coils, no breakup,   50
Ast delete Filler neck   50
Headlights 60
Genuine 96 spec rear lights (round)   100
96 spec engine single turbo Loom   40
Brake calipers   150
Front Bumper   110
Parcel shelf   80
Bonnet   80
hatch 80
RE-A steering cowl boost gauge   120
Wheel Arch liners   70
Clocks white, unkown aftermarket dial covers   60
Seats   80
Door cards with intact handles each   80
Window switches   each 50

Intake manifolds with block off plates 70
Throttle body with double throttle deleted   50

remember everything is plus P&P

Not a complete list , if anything you need ask, open to realistic offers, don\'t low ball me, been in the Rx7 scene for 12 years

Parts are sold as seen

will start to get pictures done

No dibs, money first talks
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Joeh


BlitzBoy

Hi Dude its not complete, Engine missing, Turbo kit now missing (sold), Apexi ECU missing (sold). So as it stands I would consider 2k to take it away , but remember it does have have that damage, so dont think it presents as much as a deal for you, its worth more in parts I am afraid

Update : HKS Turbo kit is sold

Apexi ECU sold pending payment
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark


ttpower

Hi can you email me some pics of the clocks to amirs@hotmail.co.uk
If there in good condition I\'ll take them.

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

ACCR

VIN: FD3S-503595

Pukka

Hi Marco
Have you got the transmission tunnel heat shielding, as I dumped mine when I went to side exit ..................... gone back to rear & it\'s getting FD:UKing hot in there!!
[SIGPIC][/SIGPIC]Stand under a Cold Shower, Tear up £20 pound notes, Invest in Motorsport, Live a Life :burnout

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Aikio

Can you ship to Norway? I am very interested in the rear bins. :)
Morten Aikio

- 1990 Mazda 323 GTX
x 1984 Opel (vauxhall in britain)corsa (nova)

BlitzBoy

it will cost you a lot of money to ship to Norway dude, probably £150 when I just did a quick quote estimating the weight and dimensions
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

BlitzBoy

Quote from: Pukka;880564Hi Marco
Have you got the transmission tunnel heat shielding, as I dumped mine when I went to side exit ..................... gone back to rear & it\'s getting FD:UKing hot in there!!

heat shielding is there will work out how to take it off next week, and work out a price
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Arnie

Do you have a standard rear bumper? If so how much with postage?

Pukka

Quote from: BlitzBoy;880657heat shielding is there will work out how to take it off next week, and work out a price

Cheers Matey, See you at the Japshow Sunday :WaveBye
[SIGPIC][/SIGPIC]Stand under a Cold Shower, Tear up £20 pound notes, Invest in Motorsport, Live a Life :burnout

BlitzBoy

Quote from: Arnie;880668Do you have a standard rear bumper? If so how much with postage?

rear bumper damaged I am afraid , one of the reasons I am breaking the car
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark