Blitzboy 2014 Drag Project with Oldone Semi PP Engine

Started by BlitzBoy, November 22, 2013, 02:09:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 3 4 5 6
User actions

BlitzBoy

#45
November 26, 2013, 01:04:04 PM
ahh optimistic dyno syndrome nearly as bad as butt dyno disease lol
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

#46
November 26, 2013, 01:06:26 PM
Quote from: Ed_RX7parts;868126apparently his terminals are 142 so the hp figure is obviously over inflated

He probably at half the power with that speed. Still cool though.

Oh and you drag racing ed, hmm need to rough up you car a bit, better of in tarts area.... I mean show and shine;):)

Grant Monkhouse

#47
November 26, 2013, 01:07:34 PM
Quote from: BlitzBoy;868127ahh optimistic dyno syndrome nearly as bad as butt dyno disease lol

I got a butt scratcher to cure that;)

BlitzBoy

#48
November 26, 2013, 01:10:02 PM
142 terminal on car that seems to have most of its stock interior therefore stock weight I reckon is around the 600bhp
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Ed_RX7parts

#49
November 26, 2013, 01:11:19 PM
Quote from: Grant Monkhouse;868128He probably at half the power with that speed. Still cool though.

Oh and you drag racing ed, hmm need to rough up you car a bit, better of in tarts area.... I mean show and shine;):)


too right!!!....LOL
[SIGPIC][/SIGPIC]
07531 669768

Official Distributor for TURBONETICS, RotaryWorks, ATS/Carbonetics, Rywire, ShineAutoProject and JKL Engineering.
Supplier of HALTECH ECU and components.
Also offering Compression Testing service for all Rotary engines

Ed_RX7parts

#50
November 26, 2013, 01:12:14 PM
Quote from: BlitzBoy;868131142 terminal on car that seems to have most of its stock interior therefore stock weight I reckon is around the 600bhp

I agree!!!
[SIGPIC][/SIGPIC]
07531 669768

Official Distributor for TURBONETICS, RotaryWorks, ATS/Carbonetics, Rywire, ShineAutoProject and JKL Engineering.
Supplier of HALTECH ECU and components.
Also offering Compression Testing service for all Rotary engines

BlitzBoy

#51
November 26, 2013, 01:29:12 PM
I reckon low boost on a semi pp circa 16-17psi would net 600bhp
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

#52
November 26, 2013, 02:43:53 PM
Quote from: BlitzBoy;868131142 terminal on car that seems to have most of its stock interior therefore stock weight I reckon is around the 600bhp

Rwhp or fwhp? Or butt scratch hp?

BlitzBoy

#53
November 26, 2013, 02:49:58 PM
flywheel for sure
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

#54
November 26, 2013, 02:54:22 PM
Yeh I was meaning rwhp at half the stated hp.

BlitzBoy

#55
November 26, 2013, 02:56:35 PM
I think on high boost should be seeing terminals of 160 plus, if you get the gearbox changes  and ratios correct
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

#56
November 26, 2013, 03:07:10 PM
At 800rwhp? Isn\'t that what speeds James and rob hit?

BlitzBoy

#57
November 26, 2013, 03:22:40 PM
well they are around 700 too 800 rwhp I would imagine, you might hit 170s with the Semi PP on IRS, but after that you would need a proper drag chassis and be straight into the low 7s at 180s with the same power
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

#58
November 26, 2013, 03:27:12 PM
A proper chassis and deep pockets. 6.0 spec cage, drag box etc one day.......

BlitzBoy

#59
November 26, 2013, 03:35:52 PM
well I reckon the fastest 13Bs are running Semi PPs the ones running running high 6s, with Meth of course circa 1000bhp, right on limit at about 3 bar
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark
Print
Go Up Pages 1 ... 3 4 5 6
User actions