Blitzboy 2014 Drag Project with Oldone Semi PP Engine

Started by BlitzBoy, November 22, 2013, 02:09:47 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

BlitzBoy

Thought I will start my project thread , as it all looks good for 2014.

Spec will be Oldone Racing Semi PP engine
Oldone Lightened and Clearenced Rotors
Oldone Ported Side Plates
Balanced Assembly
SCR 2 piece Seals
Projay Typhoon Intakes
BW475 on a T6 Housing
4 Inch Exhaust
Motec M2R
OS Giken Tripple plate Clutch
Trust Dog gearbox
Power Goal 800-900bhp



















Timmy Giving advice

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Mir

I am soon going to order the same Pro jay kit ;). Best of luck with the build matey :).

Mir
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse


Grant Monkhouse


BlitzBoy

No need for it on a manual box methinks, I am configuring the Motec to run 2 step, that should be enough, box is in bits, waiting for it to be built up, should be with me in February.
I would go Nitrous if looking to run sub 8.5, aim is to be in the 8.8 to 9 range
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

I see the pports aren\'t opened up? Are they going to be flat bottomed and with a radiiiiii too like the outline on the picture? Endurance shape pp. OR are you going to have a square shaped port? Peak hp deal?

Be good to see you back out there, 800-900 hp should hopefully get the wheels up betterer:D

Grant Monkhouse

How do you do the 2step? Cutting ignition at certain rpm?

BlitzBoy

Quote from: Grant Monkhouse;867972I see the pports aren\'t opened up? Are they going to be flat bottomed and with a radiiiiii too like the outline on the picture? Endurance shape pp. OR are you going to have a square shaped port? Peak hp deal?

Be good to see you back out there, 800-900 hp should hopefully get the wheels up betterer:D

Yeh they will be D shaped :D
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

BlitzBoy

Quote from: Grant Monkhouse;867973How do you do the 2step? Cutting ignition at certain rpm?

Yes correct, the Motec allows a secondary rev limit being activated by a switch
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

shaunwil

1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

Grant Monkhouse

Quote from: BlitzBoy;867977Yes correct, the Motec allows a secondary rev limit being activated by a switch

Have you thought of using methanol? It is after all "race fuel"

BlitzBoy

Well you cant for the Street Class I believe use Meth, plus no where near the limits for Race Fuel and WI yet
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Grant Monkhouse

Quote from: BlitzBoy;867983Well you cant for the Street Class I believe use Meth, plus no where near the limits for Race Fuel and WI yet

It\'s so much cheaper though. Be worth asking if you can race with methanol

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark