Broke the diffuser inside the injector hole!!!

[matt p]

Comp test. BUT! Only after getting the offending bit out.

Get the exhaust manifold off and have a look around. It will probably just fall out. Tbh dude id be highly surprised if you haven\'t just goosed your engine.

[rx7boy]

It\'s a bigger job to take the engine apart. You don\'t really have a choice now other than run the engine and hope the heat causes it to disintegrate. You have most likely just cost yourself a lot of money from trying to rush a solution.

[Aliakeel]

Well I\'m fitting the new injectors and rails 2mo then a remap and see what happen.
In my eye if it\'s plastic bit can damage the engine we shouldn\'t drive these cars anymore if they to sensitive like that ,:censored::censored::censored::censored: happen sometimes even with highly  skills people and I don\'t really care in end of the day rotary will need rebuilt after while wether you dropped something inside or not end off.

[matt p]

Nothing like showing a little mechanical sympathy

[davehg]

If you put anything inside any type of engine it will cause damage whether is rotary piston plastic metal or water

[Aliakeel]

I tried all day to take the bit out and I coudnt plus I\'m fasting then I said to myself what\'s the point I tried to turn the motor by hand I can hear it inside then it\'s stuck can\'t turn the motor anymore,so I thought that\'s it I\'m gonna try m luck and turn the engine and I did and it sound normal after that turn the engine by hand freely so I don\'t know what happen to the mysteiry broken bit

[Aliakeel]

If you put anything inside any type of engine it will cause damage whether is rotary piston plastic metal or water

You can leave nut or bolt inside the piston engine and runs normal that\'s what I heard from mechanics and people built engine for living don\'t get me wrong I love rotary but sometimes it get into my head in bad way...

[matt p]

That\'s going in my sig.

[davehg]

You can leave nut or bolt inside the piston engine and runs normal that\'s what I heard from mechanics and people built engine for living don\'t get me wrong I love rotary but sometimes it get into my head in bad way...

Ummm not in a million years... You could always go and try it if your convinced :Giggle

[Grant Monkhouse]

If you put a nut inside a piston engine it will most likely come out through the cylinder head!! Valves broken and everything.

If the engine is turning over freely now then don\'t worry about it. It\'s probably jammed in your turbo somewhere so the :censored::censored::censored::censored: is goig to hit the fan when you go for the remap.

A bit of advice, when working on your car where their is a chance of something falling inside your engine then remove the piece you are working on and cover any holes it leaves.

A guy on rx7 club had his injector diffusers fall into the engine when doing dyno runs and his motor became a paper weight. Those things are junk and don\'t really belong in an engine with new Injectors

[Aliakeel]

Right one more thing after I install new injectors can I plug the apexi ecu i bought and start the engine or not ?because I\'m taking the car on trailer for remap...but I need the car running first .

[davehg]

No it will not run it will flood the engine

[Aliakeel]

If you put a nut inside a piston engine it will most likely come out through the cylinder head!! Valves broken and everything.

If the engine is turning over freely now then don\'t worry about it. It\'s probably jammed in your turbo somewhere so the :censored::censored::censored::censored: is goig to hit the fan when you go for the remap.

A bit of advice, when working on your car where their is a chance of something falling inside your engine then remove the piece you are working on and cover any holes it leaves.

A guy on rx7 club had his injector diffusers fall into the engine when doing dyno runs and his motor became a paper weight. Those things are junk and don\'t really belong in an engine with new Injectors

The engine turn freely by hand now with no problem at all,also I did cover the UIM already and all injector holes,beside these stupid diffuser in the primary holes are so sealed I tried everything to save them in one piece I did catch one but the other one broke into half and fall inside they just crumble so I couldn\'t save it,I have to take all diffusers out because I\'m fitting ID once and they don\'t work with diffuser .

[Aliakeel]

No it will not run it will flood the engine

So best thing to do is install the injectors and plug the ecu and that\'s it, the remap people will sort the rest out yea?

[Aliakeel]

So if the engine turn freely by hand now all way means I might be ok they might fall into exhaust section already,can\'t hear anything now when I turn the engine just huoshsh sound on three sides of turning .