Kermit II (K-II) Triple rotor rebuild project

Started by Sicknote, September 23, 2012, 09:26:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Casey

Quote from: Sicknote;860820

My missus would crucify me if I did that in our lounge :Laugh
RX-8 230 Bridgeported: Racing Brake Disks & 4 pot front calipers,Full Racing Beat (RB) SS Exhaust system,RB ARB's F & R,RB REVI intake,Tein MonoFlex Coilovers & front strut brace.
RX-7, KIMI 1, 1st Gen S2, Silver,1983 - SORN
RX-7, KIMI 2,^^Ditto - now sold
RX-7, KIMI 3, 1st Gen S3, Red,1984

Grant Monkhouse

any idea on cost to build a car up like this?? a lot of people always want to build a race car and go racing but never realise the costs involved in just building the car, never mind actually going racing after.
 
i know iv spent a fair bit on my car, and its not near finished. hopefully i will be able list the cost once its done

Sicknote

Quote from: Grant Monkhouse;860903any idea on cost to build a car up like this?? a lot of people always want to build a race car and go racing but never realise the costs involved in just building the car, never mind actually going racing after.
 
i know iv spent a fair bit on my car, and its not near finished. hopefully i will be able list the cost once its done

Holy Moly !!!  you sure you want to know.  Including the engine and gearbox I assume ?

Grant Monkhouse

Yep. Engine and gear box are probably close 20k alone I\'m guessing.

Sicknote

Quote from: Grant Monkhouse;860907Yep. Engine and gear box are probably close 20k alone I\'m guessing.

Including the drysump you\'d be right about £23k.

I think it\'s cost about £50k in parts alone.

And about another £10k in outsourced areas.

And there\'s no way to calculate the 100\'s of hours we\'ve put in ourselves though.

I\'ve got one more BIG cost coming up and thats 4-5 K for the complete AP racing brake set up.

Grant Monkhouse

Quote from: Sicknote;860908Including the drysump you\'d be right about £23k.
 
I think it\'s cost about £50k in parts alone.
 
And about another £10k in outsourced areas.
 
And there\'s no way to calculate the 100\'s of hours we\'ve put in ourselves though.
 
I\'ve got one more BIG cost coming up and thats 4-5 K for the complete AP racing brake set up.
hopefully those 5k brakes wont fall off this time ;)

Sicknote

Quote from: Grant Monkhouse;860909hopefully those 5k brakes wont fall off this time ;)

lol, It was mostly my fault for not checking her over, it WON\'T happen again.  :)

Grant Monkhouse

So what cars could you have had for 65k? And would they match this one?

Sicknote

Quote from: Grant Monkhouse;860921So what cars could you have had for 65k? And would they match this one?

As race cars go I don\'t think anything will come close with twice that money.

Grant Monkhouse

That\'s what I was thinking, you need to get it round too gear track, see where it sits on power lap board:D

Sicknote

Quote from: Grant Monkhouse;860923That\'s what I was thinking, you need to get it round too gear track, see where it sits on power lap board:D


Now there\'s a thought !!  :)

Grant Monkhouse

Email the BBC and see what they think, build or buy track weapon.

Sicknote

Not too much from my own personal side tonight, I decided to add split grommets to the coil pack plate just
to insulate the wires going through.

Balky & Ejo got on with fabbing the new bulkhead and tunnel, looks good, this will be welded in, tiger sealed and painted
tomorrow evening ready for the engine to go back in for the last time on Wednesday.












Sicknote

Tonight\'s aims were achieved, the new bulkhead was completely welded up, primered, sealed and painted, tomorrow
morning a second coat goes on, a bit more Zircotec covering to be applied and then.... then ...... then.... the engine
goes in for the very last time and we can get on with completing the fuel system.

Balky on the welding again.




Even Elvis turned up to lend a hand !!!   :eek:

















Ada7

Looks rubbish. Think you need to start the whole project again :p

Adam
I AM HERCULESIAN
Rex II - The Bridgeport years http://mazdarotaryclub.com/forum/index.php?topic=82902.0