330mm convertion probs

[billybobbooth]

Hi guys im sorting out my brake conversion I so far have

18" alloys
330mm calipers radial not lug mount so bracket is easy to make

My question the calipers are brembos off a alfa gta but im after a disc I can just bolt on dont mind some machineing of the centre but not of the bolt holes

Closest 2 discs with 114.3 patern and 32mm wide are evo 8 at 320mm or 370z at 350mm

Othes are around the 323 mark but only 30mm wide

Will the 370z discs fit in a 18" wheel as there 19" stock on 370Z Im happy to place fit in wheel but dont wanna have to buy a disc thats no use to me. Or am I better off using a 320-324mm which I know fit in 17" as I know I can go to at least 330mm with the wheels.

[shaunwil]

Always hard to say what will fit. Its all dependent on how much room is under the wheel. I\'m running 356mm KADD kit under 17in team dynamics prorace 1.2 . I could email the wheel maker with a drawing of the brakes before I comitted to both.

Can\'t see you having issues under 18in wheels with the 350mm discs. Are you machining the bells for the discs too ? There are quite afew things to consider. Whats the bore size of the bells on the 370z disc and the offset ?

Shaun

[billybobbooth]

The centre would need boring out not a prob as my wife brother has a digital machine at work for doing this.
The hight of the disc is shorter so the disc will sit further out but I have spacers on snyways as I have a wide arch kit going on again not a problem as gives more room for making a bracket for the calipers.

Ive just been looking around to see who makes a big stock disc with the 5x114.3 stud pattern this way if in the future I cant get hold of a set og lightweight discs I can always just buy a stock disc.