Finally got an rx7 type r

Started by jazraymcbeath, February 27, 2013, 06:46:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

boosted

It\'s strange that the expansion tank has been removed....cant fathom out why the previous owner would remove.:xconfused
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

jazraymcbeath

Quote from: boosted;852192It\'s strange that the expansion tank has been removed....cant fathom out why thhivious owner would remove.:xconfused

Looks to me that only half of the car wasfitted after kit was fitted and painted. Why is there no horns,fans,overflow tank,ducting for intercooler. Wiring is a mess where there is a turbo timer and alarm. Will cut it all out and start again.

boosted

Ahh. cool looks like someone ran out of cash! Engine must be good then as you would nt bodykit a blown motor!  here\'s hoping looks good in white!

My mate had a bodyshop and had a car in for work....when finished left message for owner...never picked car up....
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

jazraymcbeath

Yes hopefully. Will try and get a good look at this weekend. Sick of welding up this customers car.

jazraymcbeath

I have ordered an overflow tank, fans,oil pressure sensor, window wiper motor and starter motor. All the aluminium water pipes had a little corrosion. Cleaned them all up and fitted new jubile clips. I noticed on the bottom of the aftermarket radiator the small pipe was loose. So radiator has been taken of to be tig welded.

The indicators fault was a blown fuse. Horn was a broken wire. I replaced the 1uf capacitor on the rev counter and redone all the soldered joints. Tidyed up the alarm wiring.

Still to bleed clutch and will wait for fans and raditor before I can test for water seals.