Rotary paranoia phenomenon!

Started by boosted, February 19, 2013, 07:20:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

boosted

Am i the only one that suffers this condition.....

Despite not having a rotary at mo just an astra turbo but i cant seem to drive with out 1 eye on all the gauges...popping the bonnet at least twice a week and checking all the levels....i used todo this in my FD and cant seem to shake the habit:xconfused
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Grant Monkhouse

I used to have it really bad with my FD, although I never had a problem with it after the rebuild! It\'s just a nagging voice in the back of your head that will never go away as no one wants to spend money on rebuilds, rotary or piston.  

However, checking under the bonnet means that prevention and good maintenance is better than the possible outcome.

Metalorama

Ha ha, I\'m totally paranoid that winter cold will get to mine. Warmed up on a regular basis and everything checked.

Grant Monkhouse

You should be driving the thing in winter not hibernating it!!

Metalorama

Quote from: Grant Monkhouse;851205You should be driving the thing in winter not hibernating it!!
Ha ha, I\'ve only had it a few months, still a wee bit scared of it to be honest. Day I got it I drove 500 odd miles from London fine, only to get stuck in the snow on my street for an hour at 3 in the morning. Snow here is unforgiving at times.

boosted

i always drove with apexi hand controller on my lap...monitoring boost and coolant temp...:D
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Brett

I drive around with one eye on the Apexi, another on the boost gauge and fingers crossed that I don\'t accidentally run out of fuel.
Brap Brap Brap Brap

mikey-t

I squirm every time I press the accelerator

marf

I decided early on not to be paranoid about the car, no point worrying every time I drive it. Its there to be enjoyed and if it goes pop it goes pop!

Have taken it out every weekend since November too, except when we had snow on the ground down here :)

BlitzBoy

I have not open the bonnet on my silver FD in two months, no apexi commander, I just plant the throttle and go every day :), if it goes it goes, but so far it has been a reliable 340bhp :)
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Will66

If they go, they go.  You can\'t spend your time worrying about it too much.
RX8 High Power, Cusco Coilovers, Dotz wheels and flames. Shoe Size 12
 
Apparently putting details of your car spec in your signature means the nice folks on exile-rotorsport think you\'re a fool.  I can think of no higher compliment!

"Eat it with a chopstick!"

boosted

I totally agree with above Comments when mine let go i knew i was on borrowed time ...and no regrets whatsoever ...loved every moment driving it and i used the power  ....perhaps its the engineer in me...i just cant help keeping an eye on things.
92 FD rx7 Twins 13.5psi.  EX Track car
EAT SLEEP ROTOR REPEAT.

Grant Monkhouse

Quote from: BlitzBoy;851274I have not open the bonnet on my silver FD in two months, no apexi commander, I just plant the throttle and go every day :), if it goes it goes, but so far it has been a reliable 340bhp :)

I think having the commander is the main cause of people\'s concern. It\'s nice to have but completely pointless. I was always monitoring air, boost and water temps. One reason why I\'m glad I now have a Haltech,  better features on the ecu and need to carry laptop if I\'m want to do some logging, only time that will be is at pod or on a dyno:)

340fwhp blitz? What mods?

BlitzBoy

Single T04E , stock engine, 10 psi
340 fly
"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

Will66

Quote from: boosted;851291I totally agree with above Comments when mine let go i knew i was on borrowed time ...and no regrets whatsoever ...loved every moment driving it and i used the power  ....perhaps its the engineer in me...i just cant help keeping an eye on things.

Nothing wrong with keeping an eye on things, analysis and interpreting.  But it shouldn\'t get in the way of enjoying it.
RX8 High Power, Cusco Coilovers, Dotz wheels and flames. Shoe Size 12
 
Apparently putting details of your car spec in your signature means the nice folks on exile-rotorsport think you\'re a fool.  I can think of no higher compliment!

"Eat it with a chopstick!"