Rx7 fb exhausts query

Started by jedo507, January 09, 2013, 10:58:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jedo507

Hi,
   Went to see a mk1, series 1 rx7 the other day and I was left puzzled by the exhaust. My dads series 3 has a small additional pipe down the side of the exhaust whilst this early one was just a straight single exhaust, no small pipe. Is this normal, did the exhaust system change between series 1 and 3 or is one of the exhausts from either my dad\'s series 3 or the series 1 non-standard?

Any help would be appreciated.

Thanks

James

HaywardRotary

They all had that small pipe as standard,this comes from the thermal reactor bolted to side of engine block where exhaust exits engine block which is a for emmisions control but often they are removed cos you make more power with header pipes so hence no need for it plus they weigh alot, likely that is what has happened in your case.

No need for an emmision test but visual test only on the RX7 so no need for it really.

That having been said when one is on the car it has really low emmisions, even lower than when a cat is used.
We warranty our rebuilt engines for Detonation, track day\'s and RWYB and NOW for 30 months which is two and half years or 30,000 miles
We also build all types of race or road engines.
We build race and track cars too.
Any kind of porting undertaken.
Single turbo conversions.
S

mpk490p

Quote from: jedo507;847105Hi,
   Went to see a mk1, series 1 rx7 the other day and I was left puzzled by the exhaust. My dads series 3 has a small additional pipe down the side of the exhaust whilst this early one was just a straight single exhaust, no small pipe. Is this normal, did the exhaust system change between series 1 and 3 or is one of the exhausts from either my dad\'s series 3 or the series 1 non-standard?

Any help would be appreciated.

Thanks

James

What\'s your budget? My gen 1 is for sale :driving

jedo507

Thanks for the details, that clarifies that question!

jedo507

And with regards to your Series 1 being for sale, is it built pre-1982?

Thanks J

mpk490p

No it\'s a series 3 gen 1 one of the last 1986, follow the link in my sig
is it a series 1 you are after specifically then?

David Nock (RIP)

Look on Autotrader. There\'s a 1980 series 1 that is causing a lot of drooling. There are only about 10 Series 1\'s that are actually roadgoing or rally cars. (S1\'s still seem to be popular rally cars). We call all SA or FB RX 7\'s \'1st Generation\' Within that are Series 1, S2 and S3 cars. Mark\'s car is a super restoration job Series 3.

The under bonnet on the Autotrader car is dirtier than I\'d like it to be.....maybe a bargaining point. Check inside the rear wheel arches and the rear sills very carefully.....they are the main rust points.....Good Luck.

Check out 1st Generation RX7 FB buying guides which exist on the net
1985 1st Generation FB-Silver. UK Car-K Reg.
Departed this world on June 23rd 2019
http://mazdarotaryclub.com/forum/index.php?topic=84914.msg910901#msg910901
Sadly Missed