Cutting out and not starting again!!!?

Started by Ed_RX7, November 02, 2003, 11:51:58 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ed_RX7

third time my FD ahs cust out and not started.......( not sure whether plugs OR Compression are an issue?

HISTORY!!!


I\'ve had my Fd now about a year. when i first got the car I has a full service (inc plugs) and got compression checked....I was told that the figures were the highest this garage had ever seen (rotechniks)...I was then informed that this is due to the engine being a new mazda block not a reman\' engine......Chuffed!!!!!:D

Started modding my rx got a PFC, hks induction, Trust down pipe, blitz exhaust, midsection, 850cc primaries, APexi BNR33 fuel pump....all ready for the FMIC and mapping.


Question:.....What are the signs of a rebuild being needed?
                     Can my compression have gotten so low already?
                     The car always starts on a tow start but nothing else will get it going...could this be due to the fuel pump?...Have heard some stories about fuel pickup......even though it has only happened 3 times( last being about 30 mins ago:reallymad ) it always happens when i have about 1/4 tank for fuel.


Relying our your infinate wisdom!!!!!!!

As its really starting to tick me off!!!!!
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

clive

Hi Ed,

Although you had your car compression tested last year l would now advise getting it checked again ASAP, sorry but it has the symptoms of a low comp engine.

All the best Clive
clive@mazdarotaryclub.com
//www.mazdarotaryclub.com
//www.mazdaRX-8club.com
All the best Clive

Ed_RX7

But i\'ve been modding senisbly and in the right order surely a rebuild is not on the cards already:( ?
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

PS changed my oil from 10/50 to 10/40 and got a bit of yellow gunk on my filler cap.
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

AHHHH...memories....not having a clue...LOL
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

wolfie1


Ed_RX7

it was compression...so went off to be rebuilt
Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

dom187


Ed_RX7

Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

Ed_RX7

Edrx7Parts

07531 669 768

"ALL I HAVE IN THIS WORLD ARE MY BALL'S AND MY WORD......AND I DON'T BREAK \'EM FOR NOBODY"

Official Distributor for TURBONETICS, ROTARYWORKS, ATS/CARBONETICS, SHINE AUTO PROJECTS and XFORCE.
Supplier of HALTECH Ecu\'s and components
Also of

TRIND-FD

Sounds like you run out of fuel :Thumbsup!
V8 fd\'s rock :cool

dom187

Quote from: Ed_RX7;846367hows the turbo going dom?

ok, I think.... I havent been able to drive the car... been busy trying to get the garage sorted so I can store the car away from the pikeys!

Mir

Quote from: Ed_RX7;17656third time my FD ahs cust out and not started.......( not sure whether plugs OR Compression are an issue?

HISTORY!!!


I\'ve had my Fd now about a year. when i first got the car I has a full service (inc plugs) and got compression checked....I was told that the figures were the highest this garage had ever seen (rotechniks)...I was then informed that this is due to the engine being a new mazda block not a reman\' engine......Chuffed!!!!!:D

Started modding my rx got a PFC, hks induction, Trust down pipe, blitz exhaust, midsection, 850cc primaries, APexi BNR33 fuel pump....all ready for the FMIC and mapping.


Question:.....What are the signs of a rebuild being needed?
                     Can my compression have gotten so low already?
                     The car always starts on a tow start but nothing else will get it going...could this be due to the fuel pump?...Have heard some stories about fuel pickup......even though it has only happened 3 times( last being about 30 mins ago:reallymad ) it always happens when i have about 1/4 tank for fuel.


Relying our your infinate wisdom!!!!!!!

As its really starting to tick me off!!!!!

Mate, I would suggest go to Powergains motorsports and they will surely sort this problem out for you.

I hope the info helps :p

Mir
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

wolfie1

Quote from: Mir;846402Mate, I would suggest go to Powergains motorsports and they will surely sort this problem out for you.

I hope the info helps :p

Mir

Mir..........have you seen the date of this post :Hammer

TRIND-FD

Spark plugs could be fouled. Or you could of flooded it. Try I flooding it Edd.
Worse case new plugs :chat
V8 fd\'s rock :cool