A single is conceived, few month before she is born?

[123tom123tom]

Its hesitating at around when the secondary injectors start to come in, are all the injectors ok/mapped in correctly?

 
no map on the car yet at all??? didnt think it would matter about mapping on the spot without boost? am i wrong
 
I have bought a apexi pfc and commander, but dont know any one to map it lol?

[Grant Monkhouse]

You could try Steve at mx5 motors/Hayward rotary north he\'s in Doncaster. There is pup at WGT over in Lancashire.

[Grant Monkhouse]

If Steve can map it for you I do have the data loggit software for the apexi he could use. I\'m over in Huddersfield BTW

[a.tapos]

have you changed the injectors?

[a.tapos]

You could try Steve at mx5 motors/Hayward rotary north he\'s in Doncaster. There is pup at WGT over in Lancashire.

 
Hahaha i know everybody loves pip but calling him pup is a bit to keen for me :rollin

[123tom123tom]

have you changed the injectors?

no standard injectors and fpr??? not going for massive boost or anything

regards tom

[123tom123tom]

rang the tuners above, pip can get me in feb 10th, hayward north dont do mapping but they no a guy called carl chambers I think he said....

how much does pip charge totally forgot to ask lol

[Grant Monkhouse]

Hahaha i know everybody loves pip but calling him pup is a bit to keen for me :rollin

Damn auto correction spelling!!!

[wolfie1]

if you have gone single you will need bigger secondry injectors, rail and fpr. i had a similair isuue when i bought my rx7 wouldnt rev when you nailed it but would take full throttle if you gradually increased it, i bought my car as a none runner and traced it to the fuel pump, bought a brand new walbro pump from ebay and it fired but thats when i had the problems your having, turned out the new pump wouldnt pump enough fuel to the engine, so fitted a known good second hand 1 and problem is sorted, i am running 95% secondry injector duty on the twins and am just away to put a kg parts fuel rail kit cause i am wanting to have the twins at near max and i have to do this cause the standard ones just dont deliver enough, so you def need other secondrys if your running a single

[123tom123tom]

if you have gone single you will need bigger secondry injectors, rail and fpr. i had a similair isuue when i bought my rx7 wouldnt rev when you nailed it but would take full throttle if you gradually increased it, i bought my car as a none runner and traced it to the fuel pump, bought a brand new walbro pump from ebay and it fired but thats when i had the problems your having, turned out the new pump wouldnt pump enough fuel to the engine, so fitted a known good second hand 1 and problem is sorted, i am running 95% secondry injector duty on the twins and am just away to put a kg parts fuel rail kit cause i am wanting to have the twins at near max and i have to do this cause the standard ones just dont deliver enough, so you def need other secondrys if your running a single

i was told by pip today that i would be fine as long as i didnt want to go above 340 bhp? I have a hrc racing pump which i put on the other day... dont want to run masses of hp... leave that to the next owner :Thumbs-up

[shaunwil]

Pips a few hundred quid for a fresh tune on a pfc. You pay for the base map and the tuning needed to tidy the map up. Can take a while on the dyno. Always good fun signing the disclaimer and watching behind the vibrating window. Make sure you switch the screen on as well so you can watch all the action (copies what pip sees on dyno)

Shaun

[123tom123tom]

Pips a few hundred quid for a fresh tune on a pfc. You pay for the base map and the tuning needed to tidy the map up. Can take a while on the dyno. Always good fun signing the disclaimer and watching behind the vibrating window. Make sure you switch the screen on as well so you can watch all the action (copies what pip sees on dyno)
 
Shaun

 
give up my heart was pounding just reading that :2eek, when i put my supra on the dyno i pooped myself? signed the disclaimer and watch my car nearly come of off the dyno wasnt happy to say the least

[Grant Monkhouse]

Pips is a hub dyno so it wont be slipping anywhere

[shaunwil]

Its a hub dyno so it won\'t try and jump off because there is no rollers

I\'ve lost count how many times mines been tweeked :Giggle

Shaun

[123tom123tom]

Its a hub dyno so it won\'t try and jump off because there is no rollers
 
I\'ve lost count how many times mines been tweeked :Giggle
 
Shaun

 
thats good then.... I am a bit worried, today I started the car and let it get up to temp, give it a poke and everytime I did water came out of the overflow on the tank to the far left of the car is that normal?? when i let it cool down I opened the filler neck on the water housing and it had dropped to half way down, it basically pushed water out but didnt bring any back