Aeromotive A1000 Fuel Pump

[Mir]

Hi Guys
 
I am having problem with fuel system. Pip has clearly told me that we need to upgrade the fuel system. I spoke with well-known tuners and they all advised that instead of having two in-tank Bosch 044s, I should buy the above kit and that would sort all the problem out.
 
I believe in buying best things because I like to buy them once:King
 
Looking for thoughts and opinion guys!
 
Cheers :Ladys-man
Mir

[RobMatthews]

I dunno if its what you need but thats some bling right there lol

[Mir]

Well the car is making 520 BHP at 6500 RPM at 0.7 Bar a Boost. The Rotors are modified to take up to 9000 RPM. At 520hp, the Motor leans out to 14.5. WHICH IS VERY LEAN.
 
I hope the above info will help!
 
Cheers
Mir

[Grant Monkhouse]

For your situation I would contact aeromotive themselves and tell them your your setup, ignition fuelling engine turbo and HP goals and they will advise you on what you need. As money is probably not  necessarily an issue for you syed then that would be the best thing to do.

Kev with his 20B twin turbo Cosmo has got a fuel system setup that can have any fuel put into it without worrying about problems. He wanted the best and a fit and forget system. I suggest you do the same.

20B turbo FTW!!!!

[Ed_RX7]

syed, what do you think the advantages will be with this pump?....and how many will you need?

[Ed_RX7]

syed, just looked up this pump....feeds the same as two 044 pumps. (600 lph at 43.5 psi)....so why spend the money...on something that you dont really need in terms of pump power.

Have you checked your injectors?....what duty were they running at when you were going lean?...



have you fitted the twin pumps in your current setup?

[steve garbutt]

Kev is running a aeromotive fuel pump as grant says and he has it running on e85 fuel so 1/3 more fuel required and 6 injectors so what model hes using is well up to the job.
His 20b twin gt45 is a Peripheral port as well so about as thirsty as they get.

[Mir]

Ed to be honest didn\'t check the injector duty cycle but I know, the injectors are sufficient for about 800hp!

The main advantage is "I don\'t have to look for a Twin 044 Pump Cradle" because lucky people like you already have it lollll and I don\'t loll

Steve, thanks for the info!

I am aslo thinking of buying Feed Intake fuel collector, that\'s if I decided to go twin 044 in tank!

Arrgg why life is not so easy when it comes to making decisions!!!

Mir

[Ed_RX7]

Ed to be honest didn\'t check the injector duty cycle but I know, the injectors are sufficient for about 800hp!


I am aslo thinking of buying Feed Intake fuel collector, that\'s if I decided to go twin 044 in tank!

Arrgg why life is not so easy when it comes to making decisions!!!

Mir

good choice on the intank solution...to help with starvation:Giggle

The reason i ask the question about the injectoers is what makes you think your injectors are flowing sufficiently?......what injectoers are you running?....how long have you had the pump?.....last time fuel filter was checked?.....what size lines are you running to the fuel rail?

are the twin bosch pumps fitted or is it just running the one atm?


sorry for the questions...just wanna make sure you isolate the problem before you go buying a £500 fuel pump.....only to stop at the same hurdle:2eek:2Rolleyes

[Grant Monkhouse]

Kev is running a aeromotive fuel pump as grant says and he has it running on e85 fuel so 1/3 more fuel required and 6 injectors so what model hes using is well up to the job.
His 20b twin gt45 is a Peripheral port as well so about as thirsty as they get.

2 gt45\'s?!! I thought they were gt40\'s??? Has he upgraded or something?

[Grant Monkhouse]

good choice on the intank solution...to help with starvation:Giggle

The reason i ask the question about the injectoers is what makes you think your injectors are flowing sufficiently?......what injectoers are you running?....how long have you had the pump?.....last time fuel filter was checked?.....what size lines are you running to the fuel rail?

are the twin bosch pumps fitted or is it just running the one atm?


sorry for the questions...just wanna make sure you isolate the problem before you go buying a £500 fuel pump.....only to stop at the same hurdle:2eek:2Rolleyes

I would hope that syed has changed the
Fuel lines for something the size of an8 lines and
Fittings? Using the old crappy lines is a disaster waiting to happen. especially with 1,000hp in mind.

Syed with that pump I would think it can pump methanol safely and in enough quantity so it\'s a good choice, however check other things
First to save some pennies here and there

[HaywardRotary]

I have that pump in my RX3 with 20b engine.

[Mir]

Ed, I am having a combination of -6 and -8 lines and I am also using earls fittings. I have  3x1680s and 3x850s they are high impedence. The fuel pump is brand new and only 6 months old. Fuel filter was checked 2 years ago, but then my car has always been a garage queen so the time does not matter really! I am still runing one intank 044 pump.

So what\'s your verdict on that? As always you have been very helpful.

Thanks Carl for responding
Grant cheers for the info

cheers
Mir

[Grant Monkhouse]

Ed gets 5 lines of response and me and Carl get 4 and 5 words?!

That\'s not fair at all. Lol

[Ed_RX7]

like i said you really need to isolate the problem...tbh...an o44 pump wouldnt run out of puff at 520hp....so already you should know your issue is elsewhere.

The 850 are no doubt used items...they may possibly be blocked.