Got that terrible sinking feeling

Started by Skifledanabit, August 17, 2011, 11:50:04 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

Skifledanabit

Just drove back from a mates, noticed an ominous metal vs metal noise emanating from the engine bay at just over 3k revs when accelerating...

Pretty sure it\'s time for a rebuild... What do you guys think?
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

Lacey

I think I get that same sinking feeling when I try to swim. :Laugh

Hope somebody more in the know can help, but i would have thought a metal on metal \'noise\' would be more likely to do with the wheels or drive system, as you shouldn\'t be able to hear much from inside the block itself, especially while in the cab?
SuperCripple!â,,¢ & Co-Owner of JapGirls.
Happy owner of a constant work-in-progress, Red-Interior[COL

Skifledanabit

Could be any number of things, two most likely are tips or clutch failure, if it was brakes/wheels etc it would happen whether accelerating or coming off, I\'m hoping it\'s clutch, I\'ve got a spare, tips would be a complete PITA.

I\'ll rev it up tomorrow at a standstill, if it\'s clutch, it won\'t squeal, if it does, brown trousers time.
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

Prof

Can you post a vid with good sound ?
 
Maybe we could work out what it is.
 
Don\'t rule out less expensive problems like fubar alternator bearing ;)
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


TiddlesRX7

Yeah fingers crossed for you mate. If it was tip related would it not happen at all RPM\'s? Hopefully its a simple fix.

Ade
I don\'t need to upgrade my stock turbo to beat your ass!

Get your finger out, get it on the road and start driving it then!!! (B.Martin 25/2/12)

B.Martin

Would the engine not be running like crap with imminent tip failure?

Skifledanabit

I haven\'t had a chance to check yet today, the alternator was refurbed in march so it shouldnt be that, I\'ll try and get a video but I doubt you\'d be able to hear it, its quite faint but noticeable
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

B.Martin

Not something daft like a wheel bearing is it?

Skifledanabit

1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

Prof

Power steering fluid level ?  - I had some wierd noises out of mine recently and it was lower than the bottom of the dip stick -sort of metallic high pitched scratching - but only when steering.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


Skifledanabit

I\'ll give that a check, just given it a rev out of gear, held it at the point, no sound, must be drivetrain related or hubs maybe, very slight noise in 2nd, noticeable in 3rd
1989 Gen 2 EGi //www.missbanzai.net
[SIGPIC][/SIGPIC]

m1tch

Syncros going in the box? Or might just be something that is vibrating on the top of the engine bay/firewall when the engine is under load?

Unless its turbo related at that RPM?

Lacey

Won\'t be turbo related on Skiffy\'s EGI, silly Mitch ^_^
SuperCripple!â,,¢ & Co-Owner of JapGirls.
Happy owner of a constant work-in-progress, Red-Interior[COL

B.Martin

Well that rules out one expensive problem then :Giggle

m1tch

Might just be a rattling heatshield then :)