If you guys have to choose?

Started by Mir, May 04, 2011, 02:34:57 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Grant Monkhouse

i like the fortune kit as it changes the car into something completely different, however i would go for the 4 rotor over a bodykit anytime!!
 
if you are going for the 4 rotor it just has to be PP\'d, i remember you saying you werent keen on PP\'s but just think about it, twin GT42R, 4 rotor PP, im going out on limb here and saying that there would be minimal lag, and i would like to think you would acheive over he highest HP figure that was acheived by the 4 rotor single turbo BMW in ozzy land at 1640 HP i believe??!!
 
going for anything other than a PP on a 4 rotor is simpl pointless in my eyes.
 
whichever you decide to do make sure you finish it and acheive some huge numbers!!

Grant Monkhouse

RE A JGTC kit is the best kit i have seen on an FD ever!! good suggestion!

Mir

If I ever did a 4 rotor, It will b done by Pip! I have had fun with My 20b.. My 20b was over 600hp, before it det.. and beating a 850hp skyline was like dream coming true! So 4 rotor is just for fun!! Something different and unique!! I know I will eventually do it, but I m controlling myself!!

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

m1tch

Burnout kit and 20B with 3 x GT4088s :)


Mir

Quote from: m1tch;760148Burnout kit and 20B with 3 x GT4088s :)


I have burnout bodykit on my car! But 3 turbos... There is only one car in Aussie, who is running 3 turbos on 20b, I have learned that it was a very difficult task for him and manifold itself was a nightmare!! So it is a no go area for me!! Two turbos can suffice thou!!

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

m1tch


SiH

If you can find a source of cheap supra 6 speeds, then the world over her will be your oyster - they\'re silly money. TBH though I\'m not sure you will be able to - they\'re sought after worldwide.

Mir

Yeah I know, I had some emails today from sources in Aussie, japan and US, they informed me abt da pros and cons of 6 speed v161getrag! The principle reason of them being expensive is solely bcz they were introduced in 1996 and suddenly ppl realised dat they hold up to 1600 hp..so da demand went up and supply went down..before that, they were in non existence. Offcourse, some ppl did conversion on there cars. My sources are telling me dat, now da situation is like dat, Toyota don\'t want to sell these products to da general public except dealers.. Hence they are more out of reach.. That\'s da sole reason they going for dat sort of a price tag. One of my mate in NZ mailed me said dat, maintaing a tremec is cheaper then v161, coz if something goes wrong with box, it\'s virtually a nightmare to source parts from Toyota.. So alot of research is involved in that!! And I m not finished with it. But I m determined to obtain a best possible solution for our Fds so that v can enjoy a solid but cheap gearbox set up..

I spent some serious amount of money on these cars, but now I say to myself, if I had known, what I know now, I would have perhaps saved half of it.. So don\'t worry everyone wud benefit from my research

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

shaunwil

Surely if you can shoe horn a 7lt V8 twin turbo into an FD engine bay then a twin turbo 4 Rotor would be possible ??

Shaun
1994 White FD with A-spec GT3574R - 358bhp at the hubs at 0.9bar :3gears-lh
2003 Mondeo 2lt 130ps Diesel Estate Daily :driving

Nik da Greek

The Supra six speed is made by Getrag isn\'t it? Can you get them directly from them?

Kash_

Quote from: Mir;760146If I ever did a 4 rotor, It will b done by Pip! I have had fun with My 20b.. My 20b was over 600hp, before it det.. and beating a 850hp skyline was like dream coming true! So 4 rotor is just for fun!! Something different and unique!! I know I will eventually do it, but I m controlling myself!!

Syed

Nice! :burnout How much you beat it by?

trotter

4rotor every day - the Fortune is an absolute Holocaust of a kit.

Another vote for the JGTC kit though - that\'ll be presence for you!!
Work hard, play hard house :D

Mir

Quote from: Kash_;760233Nice! :burnout How much you beat it by?

If you are asking car gaps..then it was nearly two cars gap....I was leading-off course not chasing lolll

It was something I always wanted to do, because the owner of the Skyline was very arrogant and I personally believe that except God, No one has the right to be arrogant.... I hate arrogant people :)...Sorry..


Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

Laeeq

Quote from: Mir;760235If you are asking car gaps..then it was nearly two cars gap....I was leading-off course not chasing lolll

It was something I always wanted to do, because the owner of the Skyline was very arrogant and I personally believe that except God, No one has the right to be arrogant.... I hate arrogant people :)...Sorry..


Syed

 i think i know the owner:2Rolleyes but arn\'t all bus drivers the same??
Laeeq

Mir

Quote from: m1tch;760148Burnout kit and 20B with 3 x GT4088s :)


Quote from: Laeeq;760236i think i know the owner:2Rolleyes but arn\'t all bus drivers the same??

I think yes, u do know him lolll.. How well, I don\'t know dat :)

yes arrogant people are all da same!!

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C