For Sale 20b FD

Started by Mir, March 18, 2011, 07:37:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 ... 10
User actions

Mir

March 18, 2011, 07:37:31 PM
[ATTACH]50981[/ATTACH][ATTACH][ATTACH]50983[/ATTACH][/ATTACH]

Hi

Here I have my joy and pride for sale.

History:
The car has never been owned by anyone. I have owned this car for the last 3 years-in fact I went to Japan to buy it. I have the pictures of the car when it was in Japan.

The engine is newly rebuild and it has only done around 800Miles-hence it needs to be remapped and checked by WGT at some point. It is under warranty.

Spec of the Car: It’s a Rough Spec..

Body:
Original Burnout Body Kit
Replica, Re Lights (HID)
Custom Paint Job hardly any scratches or dents
Mazda Speed Wing
99 spec rear lights
Aerodynamic Side Mirrors

Suspension:
The engine is pushed back for the Weight Distribution
Ohlin Coilovers (Drag Suspension)
Irotor Disc and Brakes pads
Kazz Super Q Diff
KG Part Diff Brace
All around bushes are in good condition and changed previously
18 Works Deep Dish Alloys x 4

Interior:

Custom Interior-sprayed in red and Black

Bathurst Red Door Cards

Momo Steering Wheel

Indigo Clusters

RZ Recaro Seats with Approved Race Harnesses
One tiny split on the passenger side seat and one split on the Driver side seat.. very clean seats-splits can b hardly notice.. These splits were caused by Fat Cops…Long story!! You can see both the splits in one of the interior pictures..

Engine:

Microtec LT12S ECU with Dash,

Greddy e01 Boost controller

20B Ported and Doweled Block, Built by WGT and still under warranty for 12 months

Brand New Rebuild with race spec guidance!! One of the secrets of Pip!!

Single Turbo, T88 Greddy, HKS Wastegate

Custom manifold and Straight through Down Pipe

Extreme Rotary’s, Custom Secondary and Primay Fuel Rails

3X 1680s AND 3 X 850s Injectors

Twin plate Carbon Clutch

FPR

Megnacore Leads

Polished Engine Bay

PWR Rad and Trust Intercooler

Pager Alarm System

I have missed a lot of Info as I just can’t remember it on top of my head. The only thing the car needs is Motec Ecu and 8CDI box.. as this management can fine tune the car and the car in return will produce some serious  power….REASON FOR SALE IS TOP SECRETE, BUT I CAN TELL YOU I WILL BE DRIVING ANOTHER ROTARY WITHIN FEW MONTHS…

FEEL FREE TO MAKE ME AN OFFER, I will consider all reasonable offers!!
…OR I AM ALSO WILLING TO BREAK THE CAR IF THE INTEREST IS SHOWN!! If you Dib on any part, plz can you also mention how much you wanna pay for that part….

Regards
Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

Mir

#1
March 18, 2011, 07:47:56 PM Last Edit: October 17, 2012, 09:28:51 AM by Brett
my contact info is

gillanis@hotmail.com
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

yehreally

#2
March 18, 2011, 07:52:44 PM
Breaking this would be INSANE... contact info for a PX pls :god

steve garbutt

#3
March 18, 2011, 07:56:20 PM
Well if you do break it ill pop dibs on the front sub-frame and associated mounting equipment for the 20b to go into the FD.
Ill pay top money in cash, obviously ill collect.
Tact is the knack of making a point without making an enemy.
Steve@mazdarotaryclub.com

Nik da Greek

#4
March 18, 2011, 07:59:25 PM
I saw a lot of the work that Super 7 put into making this originally, and some of the fab work and attention to detail is truly spot-on. The amount of man-hours that went in makes it a bargain at (almost) any price. GLWTS!

Mir

#5
March 18, 2011, 08:01:01 PM Last Edit: October 17, 2012, 09:29:04 AM by Brett
Quote from: yehreally;749896Breaking this would be INSANE... contact info for a PX pls :god

Wat you have for part exchange??

Contact Info,
gillanis@hotmail.com
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

Mir

#6
March 18, 2011, 08:04:22 PM
Quote from: Nik da Greek;749900I saw a lot of the work that Super 7 put into making this originally, and some of the fab work and attention to detail is truly spot-on. The amount of man-hours that went in makes it a bargain at (almost) any price. GLWTS!

Cheers Nik

The amount of hard work and effort gone in this car is outlandish...

We spent some good money on the car too..

See wat kinda response i get...

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

Rotormotor

#7
March 18, 2011, 10:41:44 PM
How much u looking for for the car?
Chris

Mir

#8
March 18, 2011, 11:57:06 PM
I m looking for reasonable offers really!! So make me an offer...

U can mail me the offer if u want
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

gsb876

#9
March 19, 2011, 12:30:47 AM
Any more pics of the car ???? looks very nice from what i can see :InLove
"Every generation has the chance to change the world"

Mills & Bains guest author :Giggle

Mir

#10
March 19, 2011, 01:15:57 AM
Yes, I have loads of em.... I thought those posted pics wud do for now..

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

Mir

#11
March 19, 2011, 01:19:10 AM Last Edit: October 17, 2012, 09:29:12 AM by Brett
Quote from: steve garbutt;749898Well if you do break it ill pop dibs on the front sub-frame and associated mounting equipment for the 20b to go into the FD.
Ill pay top money in cash, obviously ill collect.

Email me the offer u want to make for the aforementioned parts. I may surprise u.

Syed
gillanis@hotmail.com
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C

rx-dave

#12
March 19, 2011, 06:17:01 AM
Syed you can\'t sell it  :eek:!!!! What will you spend all your money on instead??  
I\'m strongly considering selling my NSX now as i\'d love your car for the summer :Thumbs-up
Dave.

RX7heaven

#13
March 19, 2011, 08:51:23 AM
Very nice, I guess if I have to ask the price it is too expensive for me!

If I hadnt bought one end of last year this would have been a dream buy for me as ticks a lot of boxes of what I want.

Best of luck with the sale.
Doin it for the Cars

Mir

#14
March 19, 2011, 09:01:02 AM
Quote from: rx-dave;749973Syed you can\'t sell it  :eek:!!!! What will you spend all your money on instead??  
I\'m strongly considering selling my NSX now as i\'d love your car for the summer :Thumbs-up
Dave.

Hi Dav

u r welcome to buy it. Lemme know if u r interested..

Syed
I am building a Genuine Fastest Street Rotary!
No Cutting and No Removals
Love FDs. Currently own:
20b-Triple Rotor,Single turbo FD
13B- Two Rotor, 2000spec on Stock Twins-FD
13B- Two Rotor, Single Turbo FD
Quote:
Originally Posted by youngone 
It takes some money for engineering a proper 20b

My C
Print
Go Up Pages1 2 ... 10
User actions