Toe settings and rear bushes...

Started by mark-ashley, January 18, 2011, 07:10:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mark-ashley

Can anyone tell me what the front toe settings for an FD with 18" Wheels would be please ?
 
I have just been to get the tracking done and my friend who runs the tyre shop asked me to find this out before coming down to him, any advice would be greatly appreciated..
 
Second question, whenever i go over a bump at a not so fast speed, the rear of the car really clunks like it might as well have no suspension at all.
 
By all accounts, the suspension is pretty stiff on the car but it sounds to me like maybe one of the rear bushes has gone..
 
Is this a common on FD\'s ?
 
If anyone could come back to me i would greatly appreciate it.
 
Thanks !
 
Mark
1993 FD3S - Street port, Decat, Apexi FC, Apexi Induction - Engine rebuilt and installed by Hayward Rotary, too fast for the mean streets of Croydon !

mark-ashley

Just seen the toe settings in the sticky !
 
Could still do with some advice on the bushes if anyone could enlighten me, thanks !
1993 FD3S - Street port, Decat, Apexi FC, Apexi Induction - Engine rebuilt and installed by Hayward Rotary, too fast for the mean streets of Croydon !

SiH

If the rear clunks then it\'s more likely than not to be the rear pillowballs, pretty common. There are 3 of the larger each side(1 lower arm, 2 upper arm IIRC) and 1 smaller each side (toe link) - all are about £50 each from Mazda, and you\'ll also need new dust seals :(

If you\'re going for the whole set it may work out cheaper to get them from RHDJapan.

trotter

yep, common problem. Mine have just gone :(

Have a word with Jon @ AtomicRex - he\'s sorting me out a complete new set of bushes. (6 pillowballs + 30 assorted others!!)

graeme
Work hard, play hard house :D

mark-ashley

Nothing on this car is ever cheap !!!

Thanks for the advice, always appreciated !
1993 FD3S - Street port, Decat, Apexi FC, Apexi Induction - Engine rebuilt and installed by Hayward Rotary, too fast for the mean streets of Croydon !

mark-ashley

RHD don\'t do a complete set for the rear....
1993 FD3S - Street port, Decat, Apexi FC, Apexi Induction - Engine rebuilt and installed by Hayward Rotary, too fast for the mean streets of Croydon !

SiH


ANRX7

I\'ve had all the bushes replaced by AtomicRex. All suspension and steering done and also had all wheels realigned properly. Good job done by ARex. Recommended.