ECU: What are you using and why?

[Brett]

As per the thread title, which ECU are you using and why? :Talking1

[Mir]

I m using microtec Ltx 12s.. I m using it because I can\'t afford Motec
anyone wanna buy microtec off me???

Syed

[SiH]

The ubiquitous PFC, because it\'s perfectly capable for low to moderate power needs, plug and play, relatively cheap, and widely mappable

[BlitzBoy]

Im using a Motec M2R (two rotor application), good resolution, scable in revs (mine goes up to 10000 rpm at least, plenty of options, downside you have to run premix as it does not control the OMP

[Mir]

Im using a Motec M2R (two rotor application), good resolution, scable in revs (mine goes up to 10000 rpm at least, plenty of options, downside you have to run premix as it does not control the OMP

Hi blitz,

wat ratio you use on your premix?? i.e. 10 to 1 or more??

Syed

[Nik da Greek]

I\'m running an Apexi PFC cos I like having an ECU so numb it keeps letting my engine explode

[od404]

The ubiquitous PFC, because it\'s perfectly capable for low to moderate power needs, plug and play, relatively cheap, and widely mappable

 
This... :WaveBye

[Brett]

I\'m running an Apexi PFC cos I like having an ECU so numb it keeps letting my engine explode

Maybe we should have a whip round and send your ECU on an electronics course or something? :Laugh

Told you ages ago, you want a 2nd gen - all you have to wrry about then is keeping the floor in one piece :Giggle

[Prof]

2nd Gen - Blitz Access ECU (chipped stock ecu, so get my OMP and all those good things) with Emanage Ultimate for larger secondaries, tunability on top of the fixed map (fuel and timing, cut and add), plus it can look after mappable WI and some other goodies too.

[mx1311]

I m using microtec Ltx 12s.. I m using it because I can\'t afford Motec
anyone wanna buy microtec off me???

Syed

nothing wrong with the 12 depending on what options you had opened when it was ordered and the mode its mapped in


im using a lt10s, apart from the resolution being short its ok, will be ordering an ltx12 for my new project

c

[fil_auto]

Apexi PFC - does what I need

[Mir]

Selling my ecu if anyone is interested??

[mx1311]

do you know whats unlocked/what map sensor is in it?

[BlitzBoy]

Hi blitz,

wat ratio you use on your premix?? i.e. 10 to 1 or more??

Syed

you would never run 10:1 ratio lol.
I run 100:1, so 100ml to every 10 litres of fuel

[turbotoaster]

power fc

decided to use it as it came with a pretty decent basemap to start, had plenty of support and is a very easy ecu to map for a first timer, plus can make changes to the map without having to get the laptop out everytime.