How To Connect My Coolant Air Separator Tank?help

Started by vitamintommy, November 13, 2010, 04:56:52 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

vitamintommy

November 13, 2010, 04:56:52 AM
Hello Rotary Family,i Have Question About My New Aluminum Air Separator Tank How Do I Connect The Hose Right And They Cam With Two Diffrent Type Of Ast Cover One W/spring And One Without Which One Should I Use? The Ast Came With Four Connection One At The Tank Bottom,one At The Lower Side Body,one At The Top Locate Like Over Flow Possition,and One At The Top Side Body!how How How It Work

Nik da Greek

#1
November 13, 2010, 10:53:27 AM
It only needs three connectors. The one on the neck goes to the overflow tank in the driver\'s side wheel area. The one on the side goes to the filler neck near the alternator/air pump. The one on the bottom goes to the radiator. Guess you\'ll have to block the fourth one off. It should have a sprung pressure cap. 0.9 bar
Hope this helps :Thumbs-up

vitamintommy

#2
November 14, 2010, 05:16:25 AM
Quote from: Nik da Greek;726492It only needs three connectors. The one on the neck goes to the overflow tank in the driver\'s side wheel area. The one on the side goes to the filler neck near the alternator/air pump. The one on the bottom goes to the radiator. Guess you\'ll have to block the fourth one off. It should have a sprung pressure cap. 0.9 bar
Hope this helps :Thumbs-up

the bottom one i connect to the bottom of the radiator,the fourth one how u know that i block that?where is the fourth one?should that connect?which one i should put coolant in and step?
Print
Go Up Pages1
User actions