Chronicles of a 13BT swap......

Started by captainbizzaro, October 05, 2010, 12:46:53 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

RamoNZ

The range wont be that good even with a full size tank - you\'d be looking at around 100miles, which is only a 50 mile journey if you want to come back without filling up :)

Cant you squeeze in 10 gallons?

captainbizzaro

Quote from: RamoNZ;721543The range wont be that good even with a full size tank - you\'d be looking at around 100miles, which is only a 50 mile journey if you want to come back without filling up :)

Cant you squeeze in 10 gallons?

I\'ll have a look at some tanks online and see what dimensions a 10 gallon tank would be and attack NEV with a tape measure in the morning.

syebba

If u want an anti explo fuel cell tank made up in alloy,Dax & Ak would be worth looking at,they obviously know the manufacturers or fuel tanks,so could probably get one made to original dimensions.
ta stu..

captainbizzaro


captainbizzaro

No engine progress today as I\'m now waiting for bits so spent the day creating my ghetto workshop as the building I am carrying out swap had no front on it, so thats done with the aid of corrugated steel sheets bish bosh bash etc. But at least I now have a dry space with 360 degree access to the car rather than struggling in a single size garage.

So here he is, the last of the outside he\'ll see for a while unless the weather is good next weekend then it\'s engine pull time although I\'d like to get that 12A sold first.
[ATTACH]49280[/ATTACH]

CHC (RIP)

Quote from: captainbizzaro;721511Bit of progress today, after a ridiculous amount of huffing and puffing I finally got the e-shaft pulley off allowing me to remove the front cover.
[ATTACH]49267[/ATTACH]
 
Also removed the turbo and manifold, and gave the block a bit of a scrub. So now ready for the 12AT front cover and sump from Ramon. Nearly time to pull the 12A.....which reminds me, if anyone wants or knows someone who wants a sweet running 12A which can be seen running then point them in my direction!

 
Hi Tim,
I\'m in early stages of a possible deal which if it goes ahead will need a 12A engine.
I\'ll let you know what develops soon as I hear anything positive.
Cliff
1983 1st Gen Series 2 Elford Turbo - the New \'JAZ\'
Departed this world on July 19th 2019
http://mazdarotaryclub.com/forum/index.php?topic=84914.msg910901#msg910901
Sadly Missed

captainbizzaro

Ok Cliff, it\'ll probably be in Nev for another two weeks yet so not a massive rush I just want anyone who\'d be interested to have plenty of time to see it running.

Ian65

Quote from: captainbizzaro;721698No engine progress today as I\'m now waiting for bits so spent the day creating my ghetto workshop as the building I am carrying out swap had no front on it, so thats done with the aid of corrugated steel sheets bish bosh bash etc. But at least I now have a dry space with 360 degree access to the car rather than struggling in a single size garage.

So here he is, the last of the outside he\'ll see for a while unless the weather is good next weekend then it\'s engine pull time although I\'d like to get that 12A sold first.
[ATTACH]49280[/ATTACH]


so this is where you\'ll be living for the next 6 months then Tim!

captainbizzaro

Ha yeah you got it Ian, think it dawned on the good lady too as I trundled in there with my make shift woodburner. Can\'t think straight if I\'m cold!

Steve-A

Looking good tim :)

Sure it\'ll get cosy in there with wood burner and the car, if you had a kettle and toilet you\'d never need to leave! :P
1984 Rx7: Gold. Edging towards roadworthyness!

mx1311

Quote from: 12at;719716was talking about rx8 box with pip at the weekend and he agreed behind a turbo engine they may not last long but again depends on how you drive it and what power you putting through it..

500+hp and used in anger for 2 years without issue

:Hammer


captainbizzaro

Quote from: Steve-A;721790Looking good tim :)

Sure it\'ll get cosy in there with wood burner and the car, if you had a kettle and toilet you\'d never need to leave! :P

Thats the plan mate! Kettle is next on the list...

captainbizzaro

Quote from: Ian65;721876would this be any use for your project Tim?  

http://cgi.ebay.co.uk/Mazda-RX-7-RX7-FC3S-1986-1991-Turbo-Manual-Gearbox-70k-/170554351029?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27b5d4ddb5

Cheers Ian but I\'ve sorted one from Prof, thanks for the thought.:guinness

RotorHeid

Quote from: mx1311;721811500+hp and used in anger for 2 years without issue

:Hammer
won a double 2010 A8 maqure sport car class in Hillclimb and sprint with RX8 6 speed box, along with 13Bpp280+HP with no problem... with a lots of warm up,prior to starting line.
best buy that the money ever spent.