2 nipples????????

Started by monterx7, September 28, 2010, 01:27:39 PM

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

monterx7

can someone please help out, was wondering how the 2 nipples on the rear brake calipers work? is one for the pedal brake and one for the handbrake?  was getting ready to bleed my brakes and do i need to bleed both nipples?  always wondered but never bothered to ask, so here i am asking:Thumbsup!
 
 
thanks
88 gxlt US spec
86 egi UK spec

antnicuk

Hi Monte
I trust you are well.

i dont recall 2 nipples on the rear calipers of a 2nd gen but generally with any other caliper with 2 nipples, you need to bleed both,  not at the same time.

The calipers on the front of my kit car have 2 as do most \'performance\' billet type calipers and i have to bleed both on those.
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!


Lil-Steve

Sorry for a second there it sounded like you were expecting a different number, :D
Lil-Steve is.... loving it when a plan comes together.

monterx7

yep my rears have 2...1 pointing down and 1 pointing back
88 gxlt US spec
86 egi UK spec

soldave

Never knew there were 2 nipples on the rears, even after rebuilding my calipers I only bled the top ones.  Might have a look this weekend and bleed the lower ones too; see if I can tease any more air bubbles out.
1991 Mazda RX-7
1993 Suzuki Alto Works RS/X
Big in Japan: http://soldave.ismysite.co.uk

grinder

something about ( IIRC ) if you rebuild the caliper you have to do both ( or change the lines )

if you are just bleeding the brakes then you need to do just one ( although im not sure which )


1990 Black Turbo II ( Updated 24th October 2006 ) : Click Here !!
1991 Turbo II Cab ( Updated 21th May 2009 ) : Click Here !!
Piccies >>> July 2004 / August 2005
My Feedback Thread: Click Here !!
Official Mazda Rotary club Tight A$$ :King (So tight only dogs hear him fart)
MRC Bargain Hunter 2005/6/7/8/9/10/11/12/13/14 :god
Inventor of the 96p car cover:D
**Special award for services to tightness**
Lifetime achievement award for services to tightness
The tightest man on earth
:Giggle

Prof

According to the manual - bottom one is the normal bleed nipple, the upper one is used if the caliper has been emptied / replaced - although that \'seems\' back to front to me ??
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex


monterx7

i found some info on rx7club thats the opposite
88 gxlt US spec
86 egi UK spec