soft break pedal

[Red Leader]

When i first push the break pedal it feels a little soft, on second push its hard. I have brided hoses and pads all round are near new. The brake cap does have a crack in it however.

Could anyone point me in the right direction?

[rmaurer]

I had the same and after multiple brake bleeding attempts, a new master cylinder sorted it. Just make sure the new cylinder is properly bench bled before fitting and worth doing a full fluid flush at the same time.

[m1tch]

Did you bleed the brakes fully when you changed the lines? I think there are 2 bleed holes, one fills the calipers up if you have had to change lines and the other is used for bleeding.

[Red Leader]

Yes the system was fully bleed. This has only started in the last few months the lines were charged over 3 years ago.

Are you able to tell me the best place to buy a new master cylinder.

Thanks for the swift relies

[hairyhoover]

I also got this problem! not cool! ive tried everything and changed MS with no improvement the only thing i have changed is the abs unit.
 
By the way what is bench bleed?