Does anyone know the thread size of the Stock Turbo II Oil cooler line Banjo\'s?

Started by antnicuk, May 19, 2010, 10:56:27 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

antnicuk

May 19, 2010, 10:56:27 PM
I want to make up a set of oil cooler lines as I want to fit a second cooler.  All the fittings i can find are screw in male or female with a push on tail, i cant find any banjos\'

Does anyone know what size fitting i would need to replace the stock mazda banjo with a screw in fitting?
400 BHP - 650 KG\'s = 616 BHP Per Ton of Rotary Power

That\'s the way to do it! :Thumbsup!

m1tch

#1
May 20, 2010, 07:31:54 AM
Prof will know, he has refitted basically all the OEM Mazda fittings with AN fittings :D

Prof

#2
May 20, 2010, 08:29:38 AM
Hi Tony,
 
Have a search for Bish and his oil cooler lines.
 
From memory the rear iron and the oil cooler\'s are M18x1.5 and the front housing one is M16x1.5
 
I copied bish\'s arrangement going from Metric to AN10 with adatpors (3 x 90 degree AN hose ends, and a 45 degree for the front cover.
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex

Prof

#3
May 20, 2010, 08:41:40 AM
"Plus this engine is probably one of the most volumetric engines going! It passes more air than a herd of cows eating vindaloo\'s" - courtesy of AtomicRex

Print
Go Up Pages1
User actions