Is it ok to run \'RX-7 FD NGK BUR 9EQ SPARK PLUGS\' on a 356 HP FD3S...

Started by waqas_RX7, April 06, 2010, 01:49:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

waqas_RX7

Do you guys think it is ok to run \'RX-7 FD NGK BUR 9EQ SPARK PLUGS\' on a 356 HP FD3S...

I cannot fork out £35.00 per plug for NGK 10\'s :2eek

Thanks,

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark


waqas_RX7


chrisJDM

try the plugs i have listed above, they are the same as the racing plugs but for motorbikes so are ALOT cheaper, only problem is the nut is slightly bigger so its very hard to get a socket in to do them up/undo them, i had to grind down a socket to get it in.  I was happily running these on a t04r with over 400bhp

waqas_RX7

Quote from: chrisJDM;685046try the plugs i have listed above, they are the same as the racing plugs but for motorbikes so are ALOT cheaper, only problem is the nut is slightly bigger so its very hard to get a socket in to do them up/undo them, i had to grind down a socket to get it in. I was happily running these on a t04r with over 400bhp

Might just do that :)

This may sound really dumb, but do i use 2 of the B9EGV and 2 of B10EGV. Or 4 of the ones i want, i dont have much knowledge regarding ignition systems :2Rolleyes

chrisJDM

i was running 2 9\'s and 2 10\'s and worked fine for me, if you have a tuner who does most the work on your car best to check with them, by the way i get mine from //www.sparkplugs.co.uk if you put the part number in the search box will find them , i think they are £7 + vat or summit like that

BlitzBoy

"Piston Killa" 3rd Gen\'94 \'Oldone Racing Full Bridge Ported REW 13b engine with SCR seals\'. HKS T51 KAI turbo BBM mapped Motec ECU

JDS/HKS Street Class Championship Runner up 2011
Rotorstock winner 08,09
http://pistonkilla.blogspot.com/
old spec HB T51 470 @ wheels @ 1.2 BAR, 555 @ fly 10.46 @ 130 @ 1.25 Bar
new spec FB T51 482 @ wheels @ 1.15 BAR, 570 @ fly

New Project
"el fénix" RX2 by Mark & Mark

kevint

If you go with 9s, BUR9EQPs (Platinum) are supposed to last longer than BUR9EQs.  

Kevin

DR SCHNITZEL


HK FD3S


Timmy

How would EQT work the Q means it has 4 electrodes and T means it has 3 electrodes?

Turblown

9 heat range is fine at your power levels, just as long as you\'re not doing any top speed pulls.. Heat range is dependent upon driving style too, not just power.